P6F104 User’s Manual
46
Power Management:
This setting controls the Suspend Mode Timer and
HDD Power Down Timer features. There are three options:
User Define:
Allows you to customize all power saving timer features.
Min Saving:
This will set 1hour in suspend mode and 15 minutes in
HDD Power Down.
Max Saving:
This will set 1minite in suspend mode and 1 minute in
HDD Power Down.
Video Off Method:
This setting controls the video off method in
power saving mode. The default setting is “DPMS” which will
disable V/H SYNC signals and blanks the screen. Other options are
“DPMS” and “Blank Screen”. The “DPMS” option allows the BIOS
to control the video card if it has the DPMS (Display Power
Management System) feature. The “Blank Screen” option is used
when you do not have a “Green” monitor.
Video off In Suspend:
Options are “Yes” and “No”. When this
option is sets to “Yes”, the Video will turn off if the system goes into
power management “suspend” mode.
Suspend Type:
There are two options: “Stop Grant” (default) and
“PwrOn Suspend”.
Modem Use IRQ:
To enable the internal PnP modem ring to wake
up your system from suspend mode, the IRQ assigned to the modem
has to be the same as the setting in this option.
Suspend Mode:
Sets the time period before the system goes into sus-
pend mode. Configuration options: [Disabled] [1Min] [2Min] [4Min]
[8Min] [12Min] [20Min] [30Min] [40Min]... [1Hour]. The default
setting is “Disabled”.
HDD Power Down:
Options are from “1 Min” to “15 Min” and “Dis-
abled”. The IDE hard drive will spin down if it is not accessed within
a specified length of time.
Chapter 3: BIOS Configuration
