19
P6F104 User’s Manual
2.2.1 Installing CPU
To avoid being broken by the pressure of CPU insertion, the main-
board must be placed on a flat anti-static surface before the CPU is
installed. Do not touch the CPU pins with your fingers during the
installation.
1. Push the CPU ZIF socket's lever to the side a little and raise it as
far as it can go.
2. Align the CPU with the ZIF Socket 7 so that the pin 1 (cut cor-
ner) of CPU is at the pin 1 of the Socket 7 as shown in the figure
below, then insert the CPU into the socket.
3. Press the lever down to snap it into place at the side of socket.
You will feel some resistance as the pressure starts to secure the
CPU in the socket.
4. Install a heatsink with a cooling fan that is required to protect the
CPU from being damaged due to overheat.
Chapter 2:Hardware Installation
F
Pin 1
Pin 1
CPU SOCKET 370
P
G
A
3
7
0
Celeron
Processor
