23
P6F104 User’s Manual
HDD LED Connector
This 2-pin connector connects to the case-mounted HDD LED to indi-
cate hard disk activity.
STB LED Connector
This 2-pin connector connects to the case-mounted STB LED to indi-
cate standby or power status. The STB LED will still on when system is
off to indicate the AC power condition.
Reset Connector
This 2-pin connector connects to the case-mounted reset switch and is
used to reboot the system.
Power Switch Connector
This 2-pin connector connects to the case-mounted Power button to
turn on/off the system power.
Speaker Connector
This 4-pin connector connects to the case-mounted speaker
Power LED & Keylock Connector
This 5-pin connector connects to the case-mounted keylock switch
and the power LED. The keylock switch is used to lock the key-
board for security purposes. When system entering standby (sleeping)
mode the power LED will start to blink.
The front panel on your case may have a turbo switch to deactivate the
Turbo mode when a slower speed is required for a specific application.
The Intel 810 Whittney chipset does not support the hardware deturbo
function. An alternative method of using <CTRL><ALT><+/-> keys to
change the speed may be used if necessary.
Chapter 2:Hardware Installation
