P6F104 User’s Manual
12
1.6 Chipset
The Intel 810 chipset consists of one FW82810 (GMCH/0) System
Controller, one FW82801AB (ICH/0) PCI ISA/IDE Accelerator and
N82802AB(FWH) 4M-bit flash BIOS memory.
FW82810 (GMCH):
- CPU interface controller
- AGP Graphic Interface controller
- Integrated DRAM controller
- Fully synchronous PCI 2.2 bus interface
- Extensive CPU-to-AGP, CPU-to-DRAM,
CPU-to-PCI, AGP-to-DRAM, AGP-to-
PCI, PCI-to-AGP and PCI-to-DRAM data
buffering
FW82801AB (ICH):
- Interface between the PCI and ISA buses
- Power Management Logic
- USB controller
- EIDE controller
- Seven DMA channels, one timer/counter,
two eight-channel interrupt controllers,
NMI logic, SMI interrupt logic, and PCI/
ISA bus arbitrator
- SMBus interface
- Real-Time clock
- Power Management Logic
- ACPI Controller
N82802AB (FWH):
- Flash ROM DATA
1.7 Main Memory
The P6F104 mainboard provides two 3.3volt 168-pin DIMM sockets
to support 8MB to 512MB SDRAM (Synchronous DRAM). The
DIMM sockets support 1M x 64 (8MB), 2M x 64 (16MB), 4M x 64
(32MB), 8M x 64 (64MB), 16Mx64(128MB) and 32Mx64(256MB)
DIMM in single- or double-sided modules.
Memory Timing requires 100MHz or faster speed grade for
SDRAMs. Each DIMM belongs to different banks, each bank can
have different size, type, speed of memory. There are no jumper
Chapter 1: Introduction
