manualshive.com logo in svg

Freescale Semiconductor SC140 DSP Core, Справочное руководство

Микросхема Freescale Semiconductor SC140 DSP Core предоставляет передовые возможности для обработки сигналов. Пользователи могут бесплатно загрузить Руководство по ссылке manualshive.com, чтобы лучше разобраться в функциях и настройках этого продукта. Улучшите производительность вашего устройства с помощью этого революционного DSP ядра.

Поделиться
Скачать
background image

2-8

SC140 DSP Core Reference Manual

DALU

2.2.1.1   Data Registers (D0–D15)

In this section, the D0–D15 data registers are referred to as Dn. They can be used as:

•

Source operands 

•

Destination operands 

•

Accumulators

The registers can serve as input buffer registers between XDBA or XDBB and the ALUs. The registers are 
used as DALU source operands, allowing new operands to be loaded for the next instruction while the 
register contents are used by the current arithmetic instruction. 

Each data register Dn has a limit tag bit (Ln) which is used to signify whether the extension portion of the 
register is in use. The limit tag bit Ln is coupled to the extension portion Dn.e, which forms a 9-bit operand 
for the purpose of storing these bits to memory. See 

Section 2.2.1.6, “Limiting,” 

for further details.

The data registers can be accessed over XDBA and XDBB with three data widths: 

•

A long-word access, writing or reading 32-bit operands

•

A word access, writing or reading 16-bit operands

•

A byte access, writing or reading 8-bit operands

For move instructions of fractional data, the transfer of a Dn register to memory over XDBA and XDBB is 
protected against overflow by substituting a limiting constant for the data that is being transferred. The 
content of Dn is not affected should limiting occur. Only the value transferred over XDBA or XDBB is 
limited. This process is commonly referred to as transfer saturation and should not be confused with the 
arithmetic saturation mode as described in 

Section 2.2.2.7, “Arithmetic Saturation Mode.” 

Limiting is performed after the contents of the register have been shifted according to the scaling mode. 
Shifting and limiting are performed only for MOVES instructions when a fractional operand is specified as 
the source for a data move over XDBA or XDBB. When an integer operand is specified as the source for a 
data move, shifting and limiting are not performed. 

Automatic sign extension (or zero extension of the data values into the 40-bit registers) is provided when 
an operand is transferred from memory to a data register. Sign extension can occur when loading the Dn 
register from memory. If a fractional word operand is to be written to a data register, the high portion (HP) 
of the register is written with the word operand. The low portion (LP) is zero-filled. The EXT portion is 
sign-extended from the HP, and the limit tag bit (Ln) is cleared.

When an integer word operand is to be written to a data register, the LP portion of the register is written 
with the word operand. The HP and EXT portions are either zero-extended or sign-extended from the LP. 
Long-word operands are written into the HP:LP portions of the register. The EXT portion is zero-extended 
or sign-extended, and the limit tag bit (Ln) is cleared.

When a byte operand is to be written to a data register, the register’s first 8-bit portion of the LP 
(Dn.1[7:0]) is written with the byte operand. The following eight bits of the LP (Dn.1[15:8]), the high 
portion, and the EXT are either zero-extended or sign-extended from the LP lower byte. The limit tag bit 
(Ln) is cleared.

Содержание SC140 DSP Core

























































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SC140 DSP Core

Omnia 11 Installation And Operation Manual preview
11
Бренд: Omnia Страницы: 102
Sangoma A400 Installation Manual preview
A400
Бренд: Sangoma Страницы: 6
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual preview
AirPlus XtremeG Ethernet-to-Wireless Bridge...
Бренд: D-Link Страницы: 31
Mylex eXtremeRAID 1100 Installation Manual preview
eXtremeRAID 1100
Бренд: Mylex Страницы: 74
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Бренд: National Instruments Страницы: 36
OpenVox B800P User Manual preview
B800P
Бренд: OpenVox Страницы: 13
Hama 00176547 Operating Instruction preview
00176547
Бренд: Hama Страницы: 25
audemat DIGIPLEXER 246 User Manual preview
DIGIPLEXER 246
Бренд: audemat Страницы: 93
Cooler Master MCY-C3P1-KWNN Manual preview
MCY-C3P1-KWNN
Бренд: Cooler Master Страницы: 4
Digital Watchdog Compressor DW-CP04 User Manual preview
Compressor DW-CP04
Бренд: Digital Watchdog Страницы: 73
EDT PCIe Gen1 Framegrabbers User Manual preview
PCIe Gen1 Framegrabbers
Бренд: EDT Страницы: 43
KEB 1MF5280-7008 Instruction Manual preview
1MF5280-7008
Бренд: KEB Страницы: 32
Curtiss-Wright DTI-VME/S User Manual preview
DTI-VME/S
Бренд: Curtiss-Wright Страницы: 80
Addi-Data MSX-E Series Technical Description preview
MSX-E Series
Бренд: Addi-Data Страницы: 20
abaco systems PEX430 Hardware Reference Manual preview
PEX430
Бренд: abaco systems Страницы: 51
Crestron CNXIRP Installation Instructions preview
CNXIRP
Бренд: Crestron Страницы: 2
Primare P30 User Manual preview
P30
Бренд: Primare Страницы: 36
Garner HD-2X IRONCLAD Assembly Manual preview
HD-2X IRONCLAD
Бренд: Garner Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды