manualshive.com logo in svg

Freescale Semiconductor SC140 DSP Core, Справочное руководство

Микросхема Freescale Semiconductor SC140 DSP Core предоставляет передовые возможности для обработки сигналов. Пользователи могут бесплатно загрузить Руководство по ссылке manualshive.com, чтобы лучше разобраться в функциях и настройках этого продукта. Улучшите производительность вашего устройства с помощью этого революционного DSP ядра.

Поделиться
Скачать
background image

1-4

SC140 DSP Core Reference Manual

Core Architecture Features

1.3.1  Typical System-On-Chip Configuration

The SC140 is a high-performance general-purpose fixed-point DSP core, allowing it to support many 
system-on-chip (SoC) configurations. A library of modules containing memories, peripherals, accelerators, 
and other processor cores makes it possible for a variety of highly integrated and cost-effective SoC 
devices to be built around the SC140. Figure 1-1 shows a block diagram of a typical SoC chip made up of 
the SC140 core and associated SoC components (described below). In a typical system the SC140 core is 
enveloped in a platform that includes the core and supporting zero wait-state memories. This platform is 
integrated as a unit in the SoC. Although not indicated in this configuration, an SoC can contain more than 
one SC140 core platform.
An on-platform instruction set accelerator plug-in can be used as part of the SC140 core platform to 
provide additional instructions for unique application solutions such as video processing, which require 
specific arithmetic instructions in addition to the main instruction set. 

•

SC140 DSP core platform 

— Includes the DSP core and the immediate supporting blocks that 

typically run at the full core frequency. The DSP platform typically includes:

— SC140 DSP core

— Instruction Set Accelerator Plug-in (ISAP) - for expanding the instruction set with 

application-specific instructions.

— L1 caches - data and instruction caches, operating with zero wait states in case of cache hit

— Unified M1 memory - supporting both program and data, and hence connected to both the 

program and data buses of the core. The M1 memory operates with no wait states. It could be 
either RAM or ROM, or a mix of both. The RAM, depending on its’ size, may be connected as 
a slave to an external DMA.

— Program interrupt controller (PIC)

— Interfaces - translate the core data and program fetch requests to the bus protocol supported by 

the system, usually in reduced frequency.

•

DSP Expansion Area 

— This area includes the functional units that interface between the core and 

the DSP application, most importantly the functions that send and receive data from external 
input/output sources, under the control of the software running on the DSP core. In addition, this area 
includes accelerators that execute portions of the application, in order to boost performance and 
decrease power consumption. This area is application-specific and may or may not include various 
functional units such as:

— Synchronous serial interface 

— Serial communication interface 

— Viterbi accelerator

— Filter coprocessors

•

System Expansion Area 

— This area includes the SoC functional units that are not tightly coupled 

with the DSP core. Typically it may include other processors with their support platform as well. 
This area is application-specific, and may include various functional units such as:

— External memory interface

— Direct memory access (DMA) controller 

— L2 Cache controller for either data or program 

— Chip-level Interrupt control unit 

— On-chip Level 2 (M2) memory expansion modules

— Other processor cores with their supporting platforms

Содержание SC140 DSP Core

























































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SC140 DSP Core

Acconeer A111 User Manual preview
A111
Бренд: Acconeer Страницы: 32
Palm M505 Setting Up preview
M505
Бренд: Palm Страницы: 4
Jetter JXM-IO-E30 Installation Manual preview
JXM-IO-E30
Бренд: Jetter Страницы: 35
Raidon SAFETank Series User Manual preview
SAFETank Series
Бренд: Raidon Страницы: 49
Ratoc Systems SCSI PC Card REX-9530V Product Manual preview
SCSI PC Card REX-9530V
Бренд: Ratoc Systems Страницы: 30
SMART MOD IIC Installation And Service Manual preview
MOD IIC
Бренд: SMART Страницы: 15
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Бренд: MiLAN Страницы: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Бренд: Symantec Страницы: 2
SIIG NN-EC2812-S1 Quick Installation Manual preview
NN-EC2812-S1
Бренд: SIIG Страницы: 12
Commell CMB-673 Installation Manual preview
CMB-673
Бренд: Commell Страницы: 9
NC-link NC-AP111 User Manual preview
NC-AP111
Бренд: NC-link Страницы: 20
Teletronics International TT 900 User Manual preview
TT 900
Бренд: Teletronics International Страницы: 57
ekwb EK-FC980 GTX Classy Installation And Mounting Manual preview
EK-FC980 GTX Classy
Бренд: ekwb Страницы: 2
ETAS ES1392.1 User Manual preview
ES1392.1
Бренд: ETAS Страницы: 36
Microcomputer Systems MSI-P602 User Manual preview
MSI-P602
Бренд: Microcomputer Systems Страницы: 21
Net Optics Phantom HD Quick Install Manual preview
Phantom HD
Бренд: Net Optics Страницы: 2
Promise Technology Pegasus R4 Product Manual preview
Pegasus R4
Бренд: Promise Technology Страницы: 148
Azoteq IQ Switch ProxSense RS100 Application Notes preview
IQ Switch ProxSense RS100
Бренд: Azoteq Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды