manualshive.com logo in svg

Freescale Semiconductor SC140 DSP Core, Справочное руководство

Микросхема Freescale Semiconductor SC140 DSP Core предоставляет передовые возможности для обработки сигналов. Пользователи могут бесплатно загрузить Руководство по ссылке manualshive.com, чтобы лучше разобраться в функциях и настройках этого продукта. Улучшите производительность вашего устройства с помощью этого революционного DSP ядра.

Поделиться
Скачать
background image

5-8

SC140 DSP Core Reference Manual

Instruction Grouping

5.2.2  Prefix Types

The SC140 architecture supports 2 types of prefix instructions, each is used to convey a subset or all of the 
following information about the VLES:

•

The number of instructions that are grouped together in the execution set.

•

Conditional execution of the whole set or a subgroup of the set (encoding the IFT/IFF/IFA prefix 
instructions).

•

Looping information for supporting hardware loops (encoding the LPMARKA and LPMARKB 
bits).

•

Encoding extensions for high register banks (D8-D15, R8-R15).

The prefix instructions use either one or two instruction words. Since the fetch set is eight words long, and 
the maximum issue width is six (four DALU instructions and two AGU instructions), there is usually room 
for two prefix words without affecting performance. However, in order to save code size, 3 prefix 
instruction types were defined. Two one-word prefix types have a subset of the mentioned functionality. A 
two-word prefix has all of the listed functionality. The selection of the right prefix type is done by the 
assembler which automatically chooses the smallest prefix type (or no prefix at all); see Figure 5-3.

The detailed encoding for prefix words is specified in 

Appendix A.1.5, “Prefix Word Encoding.” 

 

5.2.2.1   Two-Word Prefix

The two-word prefix includes all information that could be specified in a prefix:

•

Number of instructions in the VLES

•

Mark hardware loop information

•

Specify conditional execution of the VLES or sub-groups of the VLES

•

Encode high register banks (D8-D15, R8-R15)

The SC140 16-bit instruction encoding has a three bit field for specifying each data register or address 
pointer register. On their own, these instructions can encode eight DALU registers (D0–D7) and 
eight address pointers (R0–R7). In order to specify operands that belong to the high register banks 
(D8–D15, and R8–R15), additional register field bits are encoded in a second prefix word. 

The two-word prefix includes a register field for each execution unit in the core (namely, four fields for 
DALU instructions and two fields for AGU instructions). At most, DALU instructions have three operands 
(for example, ADD D0,D1,D2). Therefore, each DALU field is three bits, so that each operand can be 
independently specified to be in the high bank. Most AGU instructions have two operands (for example, 
MOVE (R0)+,D0). Therefore, each AGU field has two bits.

A register extension bit is added for each possible operand in each execution unit. If this bit is set, it 
signifies that the respective operand uses a register from the high bank. If this bit is cleared, or if the 
respective set does not include a two-word prefix, the operand uses a register from the low bank. A 
two-word prefix is generated by the assembler if at least one of the instructions in the execution set uses a 
register from the high bank.

For a description of what conditional execution options are available, see 

Section 5.2.3, “Conditional 

Execution.” 

For a description about the function of HW loop support with LPMARK, see 

Section 5.4, “Hardware 

Loops.” 

Содержание SC140 DSP Core

























































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SC140 DSP Core

Amperes iPX5500 Instruction Manual preview
iPX5500
Бренд: Amperes Страницы: 8
Hama HDD Silenser Bedienungsanleitung preview
HDD Silenser
Бренд: Hama Страницы: 12
TP-Link VIGI NVR1008 Quick Installation Manual preview
VIGI NVR1008
Бренд: TP-Link Страницы: 2
vPipes Uilleann Quick Start Manual preview
Uilleann
Бренд: vPipes Страницы: 3
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Бренд: C&H Страницы: 32
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Бренд: ACTi Страницы: 12
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Бренд: ivideon Страницы: 11
ZiLOG Z8 GP ZGP323 User Manual preview
Z8 GP ZGP323
Бренд: ZiLOG Страницы: 11
Advantech PPC-3211W User Manual preview
PPC-3211W
Бренд: Advantech Страницы: 66
Stahl HFisolator 9730/26-11 Operating Instructions preview
HFisolator 9730/26-11
Бренд: Stahl Страницы: 2
Altimium CVHH2 User Manual preview
CVHH2
Бренд: Altimium Страницы: 12
Multi-Link Power Stone Programming Manual preview
Power Stone
Бренд: Multi-Link Страницы: 31
MicroNova O047 Technical Installation Manual preview
O047
Бренд: MicroNova Страницы: 113
IBA FOB-SDexp Manual preview
FOB-SDexp
Бренд: IBA Страницы: 36
ADLINK Technology ROScube-I Series User Manual preview
ROScube-I Series
Бренд: ADLINK Technology Страницы: 95
Commax CVN-0430F User Manual preview
CVN-0430F
Бренд: Commax Страницы: 122
Z3 Technology FV2K-DCK-1x User Instructions preview
FV2K-DCK-1x
Бренд: Z3 Technology Страницы: 94
Enterasys Matrix 6H303-48 Hardware Installation Manual preview
Matrix 6H303-48
Бренд: Enterasys Страницы: 90

Бренды по названию

Популярные бренды

Загрузить еще бренды