manualshive.com logo in svg

Freescale Semiconductor SC140 DSP Core, Справочное руководство

Микросхема Freescale Semiconductor SC140 DSP Core предоставляет передовые возможности для обработки сигналов. Пользователи могут бесплатно загрузить Руководство по ссылке manualshive.com, чтобы лучше разобраться в функциях и настройках этого продукта. Улучшите производительность вашего устройства с помощью этого революционного DSP ядра.

Поделиться
Скачать
background image

7-50

SC140 DSP Core Reference Manual

Programming Guidelines

•

Observe the immediate operand ranges as specified within the braces { } in 

Appendix A.2, 

“Instructions,”

 on page A-19. Operand values outside these ranges are undefined. Some specific 

examples are:

—

ADD #u5,Dn {0 < u5 < 32}

—

ASLL Da,Dn {-40 < Da[6:0] < 40}

•

Observe address pointer alignments on memory accesses as specified in 

Table 2-19: Memory 

Address Alignment

 and within the braces { } in 

Appendix A.2, “Instructions.” 

Misaligned memory 

accesses are undefined. Some specific examples are:

—

MOVE.L (a32),DR {0 £ a32 < 2

32

,L}

, meaning long word aligned (address is a multiple 

of 4).

—

MOVE.4F (EA),Da:Db:Dc:Dd {0 £ EA < 2

32

,Q}

, meaning quad word aligned (address is 

a multiple of 8).

•

Observe SP and OSP stack pointer quad alignment. The ESP and NSP registers have their three least 
significant bits hard-wired to zero. So SP arithmetic results that are not a multiple of 8 cannot be 
represented in the ESP and NSP registers. Note that MOVE-like instructions using SP with an offset 
to access the stack allow more general alignment based on the memory access size.

•

Observe the word alignment requirement for COF destinations. Computed COF destinations (such 
as JMP R0) that are not a multiple of 2 are in error. Misaligned program fetches are undefined. Note 
that the PC register has its least significant bit hard-wired to zero.

•

Observe modifier mode parameter constraints on size and offset discussed in 

Section 2.3.4, 

“Address Modifier Modes.” 

 Using out-of-range or reserved parameter values may produce 

undefined results. Also observe address pointer alignments specific to the selected modifier mode.

•

MOVES should be preceded by an instruction that updates the Ln-bit based on the data. Otherwise, 
the data moved may be modified by a Ln-bit not associated with the data.

•

Do not explicitly modify the SR register to change the loop flags LFn and SLF in SR. Use the loop 
control instructions in 

Table A-14: AGU Loop Control (Including Loop COF) Instructions

 on page 

A-18.

•

The SR register contains local task context such as the loop flags, T bit, etc. Always save and restore 
the SR register on exceptions and OS context switches.

•

The EMR register contains global, not local, status bits. Do not use EMR status bits for local task 
context. Do not save and restore EMR on exceptions and OS context switches.

•

Do not return from a subroutine with RTE/D, and do not return from an exception with RTS/D.

•

If the return address on the memory stack is changed to effect a task switch, use RTSTK to bypass 
the RAS mechanism. Otherwise, the SC140  will return to the previous caller location if RAS is 
valid.

•

Do not use VSL for anything other than the Viterbi algorithm. It violates the endian rules.

•

Do not use “reserved” bits in registers for data storage. Always write “reserved” bits with their initial 
reset value (usually zero). This maintains software compatibility if a “reserved” bit is defined in the 
future.

7.7.2.2   Binary Code Practices

•

Do not write self-modifying code (replacing portions of an application binary at run-time). It cannot 
be checked for errors by the assembler. It is also difficult to debug, and may not be compatible with 
future processor implementations.

Содержание SC140 DSP Core

























































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SC140 DSP Core

NEC IE-78K0-NS-P04 User Manual preview
IE-78K0-NS-P04
Бренд: NEC Страницы: 72
NEC ELECTRA ELITE IPK II Programming Manual preview
ELECTRA ELITE IPK II
Бренд: NEC Страницы: 617
NEC VERSA DOCK - SERVICE Installation Manual preview
VERSA DOCK - SERVICE
Бренд: NEC Страницы: 8
CSS SafetyNet Quick Install Manual preview
SafetyNet
Бренд: CSS Страницы: 2
EK-Quantum Kinetic FLT 80 D5/DDC Body User Manual preview
Kinetic FLT 80 D5/DDC Body
Бренд: EK-Quantum Страницы: 16
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Бренд: Garland Страницы: 30
EK-Quantum Momentum ROG Strix X570-E D-RGB User Manual preview
Momentum ROG Strix X570-E D-RGB
Бренд: EK-Quantum Страницы: 10
Lindsay Broadband LBON320AC Series Installation And Operation Manual preview
LBON320AC Series
Бренд: Lindsay Broadband Страницы: 4
ZALMAN CNPS12X User Manual preview
CNPS12X
Бренд: ZALMAN Страницы: 11
Teletronics International TT 900 User Manual preview
TT 900
Бренд: Teletronics International Страницы: 57
Kaptia Klever Getting Started preview
Klever
Бренд: Kaptia Страницы: 14
ZALMAN CNPS11X Extreme User Manual preview
CNPS11X Extreme
Бренд: ZALMAN Страницы: 12
EZCast Pro Dongle II User Manual preview
Pro Dongle II
Бренд: EZCast Страницы: 24
Antec KÜHLER H2O 920 Software Manual preview
KÜHLER H2O 920
Бренд: Antec Страницы: 6
Knowles IA611 Xplained Pro User Manual preview
IA611 Xplained Pro
Бренд: Knowles Страницы: 14
McIntosh MX160 Owner'S Manual preview
MX160
Бренд: McIntosh Страницы: 44
LST ZEB2-1 Specifications preview
ZEB2-1
Бренд: LST Страницы: 1
UMAX Technologies SuperMac E100 User Manual preview
SuperMac E100
Бренд: UMAX Technologies Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды