manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 61

FlexRay Module (FLEXRAYV4)

MFR4310 Reference Manual, Rev. 2

Freescale Semiconductor

61

 

Figure 3-1. FlexRay Module Block Diagram

The protocol engine has two transmitter units TxA and TxB and two receiver units RxA and RxB for 
sending and receiving frames through the two FlexRay channels. The time control unit (TCU) is 
responsible for maintaining global clock synchronization to the FlexRay network. The overall activity of 
the PE is controlled by the sequencer engine (SEQ).

The controller host interface provides host access to the module’s configuration, control, and status 
registers, as well as to the message buffer configuration, control, and status registers. The message buffers 
themselves, which contain the frame header and payload data received or to be transmitted, and the slot 
status information, are stored in the FlexRay Memory (FRM).

The clock domain crossing unit implements signal crossing from the CHI clock domain to the PE clock 
domain and vice versa, to allow for asynchronous PE and CHI clock domains.

The FlexRay module stores the frame header and payload data of frames received or of frames to be 
transmitted in the FRM. The application accesses the FRM to retrieve and provide the frames to be 
processed by the FlexRay module. In addition to the frame header and payload data, the FlexRay module 
stores the synchronization frame related tables in the FRM for application processing.

NOTE

The FlexRay module does not provide a memory protection scheme for the 
FlexRay Memory.

3.1.5

Features

The FlexRay module provides the following features:

Clock Domain Cross

ing

PE

TxA

RxA

TCU

config

SEQ

CHI

HIF

SEARCH

LUT

BCU

RXD_BG1

RXD_BG2

DBG0

TXD_BG1

TXEN1#

TXD_BG2

TXEN2#

DBG1

DBG2

DBG3

FlexRay Module

EBI

FlexRay 
Memory

MIF

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды