manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 197

FlexRay Module (FLEXRAYV4)

MFR4310 Reference Manual, Rev. 2

Freescale Semiconductor

197

 

•

(SSCCRn.VFR | SSCCRn.SYF | SSCCRn.NUF | SSCCRn.SUF) // count on frame condition
= 1;

and

•

((~SSCCRn.VFR | 

vSS!ValidFrame

) & // valid frame restriction

(~SSCCRn.SYF | 

vRF!Header!SyFIndicator

) & // sync frame indicator restriction

(~SSCCRn.NUF | ~

vRF!Header!NFIndicator

) & // null frame indicator restriction

(~SSCCRn.SUF | 

vRF!Header!SuFIndicator

)) // startup frame indicator restriction

= 1;

NOTE

The indicator bits SYF, NUF, and SUF are valid only when a valid frame 
was received. Thus it is required to set the VFR always, when count on 
frame condition is used.

2. slot related condition:

•

((SSCCRn.STATUSMASK[3] & 

vSS!ContentError

) | // increment on content error

(SSCCRn.STATUSMASK[2] & 

vSS!SyntaxError

) | // increment on syntax error

(SSCCRn.STATUSMASK[1] & 

vSS!BViolation

) | // increment on boundary violation

(SSCCRn.STATUSMASK[0] & 

vSS!TxConflict

)) // increment on transmission conflict

= 1;

If the slot status counter is in single cycle mode, i.e. SSCCRn.MCY equals 0, the internal slot status 
counter SSCRn_INT is reset at each cycle start. If the slot status counter is in the multicycle mode, i.e. 
SSCCRn.MCY equals 1, the counter is not reset and incremented, until the maximum value is reached.

3.4.18.5

Message Buffer Slot Status Field

Each individual message buffer and each FIFO message buffer provides a slot status field, which provides 
the information shown in 

Table 3-109

 for the static/dynamic slot. The update conditions for the slot status 

field depend on the message buffer type. Refer to the Message Buffer Update Sections in 

Section 3.4.6, 

“Individual Message Buffer Functional Description

”.

3.4.19

Interrupt Support

The FlexRay module provides 172 individual interrupt sources and five combined interrupt sources.

3.4.19.1

Individual Interrupt Sources

3.4.19.1.1

Message Buffer Interrupts

The FlexRay module provides 128 message buffer interrupt sources.

Each individual message buffer provides an interrupt flag MBCCSn.MBIF and an interrupt enable bit 
MBCCSn.MBIE. The FlexRay module sets the interrupt flag when the slot status of the message buffer 
was updated. If the interrupt enable bit is asserted, an interrupt request is generated.

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды