manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 238

Electrical Characteristics

MFR4310 Reference Manual, Rev. 2

238

Freescale Semiconductor

 

A.1.2

Power Supply

The MFR4310 uses several pins to supply power to the I/O pins, oscillator and the digital core.

The VDDA, VSSA pair supplies the internal voltage regulator.

The VDDX, VSSX, VDDR and VSSR pairs supply the I/O pins, VDDR supplies also the internal voltage 
regulator.

VDD2_5 and VSS2_5 are the supply pins for the digital logic, VDDOSC, VSSOSC supply the oscillator.

VDDA, VDDX, VDDR as well as VSSA, VSSX, VSSR are connected by anti-parallel diodes for ESD 
protection.

NOTE

In the following context, VDD5 is used for VDDA, VDDR, and VDDX; 
VSS5 is used for VSSA, VSSR, and VSSX unless otherwise noted.

IDD5 denotes the sum of the currents flowing into the VDDA, VDDX, and 
VDDR pins.

VDD is used for VDD2_5 and VDDOSC; VSS is used for VSS2_5 and 
VSSOSC.

IDD is used for the current flowing into VDD2_5.

A.1.3

Pins

There are four groups of functional pins.

A.1.3.1

3.3V I/O pins

Those I/O pins have a nominal level of 3.3V. This class of pins is comprised of all I/O pins (all MFR4310 
pins excluding EXTAL, XTAL and all power supply pins).The internal structure of all those pins is 
identical, however some of the functionality may be disabled. E.g. for the input-only pins the output 
drivers are disabled permanently.

A.1.3.2

Oscillator

The pins EXTAL, XTAL dedicated to the oscillator have a nominal 2.5V level. They are supplied by 
VDDOSC.

A.1.3.3

VDDR

This pin is used to enable the on chip voltage regulator.

A.1.4

Current Injection

Power supply must maintain regulation within operating V

DD5

 or V

DD

 range during instantaneous and 

operating maximum current conditions. If positive injection current (V

in

 > V

DD5

) is greater than I

DD5

, the 

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды