manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 57

Device Overview

MFR4310 Reference Manual, Rev. 2

Freescale Semiconductor

57

 

•

Internal power-on and low-voltage resets provided by the internal voltage regulator (refer to 

Chapter 6, “Clocks and Reset Generator (CRG)

” and 

Chapter 5, “Dual Output Voltage Regulator 

(VREG3V3V2)

” for more information).

•

Internal clock monitor failure reset (see 

Chapter 7, “Oscillator (OSCV2)

”).

When a reset occurs, MFR4310 registers and control bits are changed to known startup states. Refer to the 
respective module chapters for information on the different kinds of resets and for register reset states.

2.8.1.1

I/O Pin States After Reset

Refer to 

Table 2-3

 for the configuration of the MFR4310 pins out of reset.

2.8.2

Interrupt Sources

All possible MFR4310 internal interrupt sources are combined and provided to the host by means of one 
available interrupt line, INT_CC#. Refer to 

Section 3.4.19, “Interrupt Support

” and 

Section 6.3.2, “Clock 

and Reset Status Register (CRSR)

” for more information on available interrupt sources. The type of 

interrupt is level sensitive.

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды