manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 165

FlexRay Module (FLEXRAYV4)

MFR4310 Reference Manual, Rev. 2

Freescale Semiconductor

165

 

As a result of the message buffer search, the FlexRay module changes the state of up to two enabled receive 
message buffers from idle state 

Idle

 or locked state 

HLck

 

to the subscribed state 

CCBs

 or locked buffer 

subscribed state 

HLckCCBs

 by triggering the buffer subscribed transition 

BS.

If the receive message buffers for the next slot are assigned to both channels, then at most one receive 
message buffer is changed to a buffer subscribed state

.

If more than one matching message buffers assigned to a certain channel, then only the message buffer 
with the lowest message buffer number is in one of the states mentioned above.

3.4.6.3.3

Message Reception

With the start of the next static or dynamic slot the module trigger the slot start transition 

SLS

. This 

changes the state of the subscribed receive message buffers from 

CCBs

 to 

CCRx 

or from 

HLckCCBs

 to 

HLckCCRx, 

respectively.

During the reception slot, the received frame data are written into the shadow buffers. For details on 
receive shadow buffers, see 

Section 3.4.6.3.6, “Receive Shadow Buffers Concept

”. The data and status of 

the receive message buffers that are the 

CCRx 

or 

HLckCCRx 

are not modified in the reception slot.

3.4.6.3.4

Message Buffer Status Update

With the start of the next static or dynamic slot or with the start of the symbol window or NIT, the module 
trigger the slot or segment start transition 

SSS

. This transition changes the state of the receiving receive 

message buffers from 

CCRx

 to 

CCSu 

or from 

HLckCCRx

 to 

HLck, 

respectively.

If a message buffer was in the locked state 

HLckCCRx

, no update is performed. The received data are lost. 

This is indicated by setting the Frame Lost Channel A/B Error Flag FRLA_EF/FRLB_EF in the 

CHI Error 

Flag Register (CHIERFR)

.

If a message buffer was in the 

CCRx 

state it is now in the 

CCSu 

state. After the evaluation of the slot 

status provided by the PE the message buffer is updated. The message buffer update depends on the slot 
status bits and the segment the message buffer is assigned to. This is described in 

Table 3-100

.

Table 3-100. Receive Message Buffer Update

vSS!ValidFrame

vRF!Header!NFIndicator

Update description

1

1

Valid non-null frame received.
- Message Buffer Data Field updated.
- Frame Header Field updated.
- Slot Status Field updated.
- DUP:= 1
- DVAL:= 1
- MBIF:= 1

1

0

Valid null frame received.
- Message Buffer Data Field not updated.
- Frame Header Field not updated.
- Slot Status Field updated.
- DUP:= 0
- DVAL not changed
- MBIF:= 1

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды