manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 142

FlexRay Module (FLEXRAYV4)

MFR4310 Reference Manual, Rev. 2

142

Freescale Semiconductor

 

3.4.4.3

Sync Frame Table Area

The sync frame table area is used to provide a copy of the internal sync frame tables for application access. 
Refer to 

Section 3.4.12, “Sync Frame ID and Sync Frame Deviation Tables

” for the description of the sync 

frame table area.

3.4.5

Physical Message Buffer Description

This section provides a detailed description of the usage and the content of the two parts of a physical 
message buffer, the message buffer header field and the message buffer data field.

3.4.5.1

Message Buffer Protection and Data Consistency

The physical message buffers are located in the FRM. The FlexRay module provides no means to protect 
the FRM from uncontrolled or illegal host or other client write access. To ensure data consistency of the 
physical message buffers, the application must follow the write access scheme that is given in the 
description of each of the physical message buffer fields.

3.4.5.2

Message Buffer Header Field Description

This section provides a detailed description of the usage and content of the message buffer header field. A 
description of the structure of the message buffer header fields is given in 

Section 3.4.2.1, “Message Buffer 

Header Field

”. Each message buffer header field consists of three sections: the frame header section, the 

data field offset, and the slot status section. For a detailed description of the Data Field Offset, see 

Section 3.4.2.1.2, “Data Field Offset

”.

3.4.5.2.1

Frame Header Section Description

Frame Header Section Content

The semantic and content of the frame header section depends on the message buffer type.

For individual receive message buffers and receive FIFOs, the frame header receives the frame header data 
of the 

first valid frame

 received on the assigned channels. If a receive message buffer is assigned to both 

channels, the first valid frame received on channel A or channel B is stored. 

For receive shadow buffers, the frame header receives the frame header data of the current frame received 
regardless of whether the frame is valid or not.

For single and double transmit message buffers, the application writes the frame header of the frame to be 
transmitted into this location. The frame header is read out when the frame is transferred to the FlexRay 
bus.

The structure of the frame header in the message buffer header field is given in 

Figure 3-101

. A detailed 

description of the frame header fields is given in 

Table 3-81

.

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды