manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor FlexRay MFR4310 Скачать руководство пользователя страница 139

FlexRay Module (FLEXRAYV4)

MFR4310 Reference Manual, Rev. 2

Freescale Semiconductor

139

 

3.4.3.4

Message Buffer Configuration and Control Data

This section describes the configuration and control data for each message buffer type.

3.4.3.4.1

Individual Message Buffer Configuration Data

Before an individual message buffer can be used for transmission or reception, it must be configured. 
There is a set of common configuration parameters that applies to all individual message buffers and a set 
of configuration parameters that applies to each message buffer individually.

Common Configuration Data

The set of common configuration data for individual message buffers is located in the following registers.

•

Message Buffer Data Size Register (MBDSR)

The MBSEG2DS

 

and MBSEG1DS fields define the minimum length of the message buffer data 

field with respect to the message buffer segment.

•

Message Buffer Segment Size and Utilization Register (MBSSUTR)

The LAST_MB_SEG1 and LAST_MB_UTIL fields define the segmentation of the individual 
message buffers and the number of individual message buffers that are used. For more details, see 

Section 3.4.3.1.1, “Individual Message Buffer Segments

”

Specific Configuration Data

The set of message buffer specific configuration data for individual message buffers is located in the 
following registers.

•

Message Buffer Configuration, Control, Status Registers (MBCCSRn)

The MCM, MBT, MTD bits configure the message buffer type.

•

Message Buffer Cycle Counter Filter Registers (MBCCFRn)

The MTM, CHA, CHB bits configure the transmission mode and the channel assignment. The 
CCFE, CCFMSK, and CCFVAL bits and fields configure the cycle counter filter.

•

Message Buffer Frame ID Registers (MBFIDRn)

For a transmit message buffer, the FID field is used to determine the slot in which the message in 
this message buffer is transmitted.

•

Message Buffer Index Registers (MBIDXRn)

This MBIDX field provides the index of the message buffer header field of the physical message 
buffer that is currently associated with this message buffer. 

3.4.3.5

Individual Message Buffer Control Data 

During normal operation, each individual message buffer can be controlled by the control and trigger bits 
CMT, LCKT, EDT, and MBIE in the 

Message Buffer Configuration, Control, Status Registers 

(MBCCSRn)

. 

Содержание FlexRay MFR4310













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды