Freecom Quantum SuperLoader 3, Руководство пользователя

Страница: 182 / 230

Tape Drive Error Logs
164 SuperLoader 3 Autoloader User’s Guide
3h
Medium Error.
The drive was not able to read or write successfully to the tape.
Look at the Event Logs and correlate the events with media and system logs to
determine if this is due to media or the drive. This sense key is recorded in the
drive logs.
4h
Hardware Error.
The drive has detected an error condition related to the
hardware. You will need to refer to the Sense Key and ASCQ, along with other
event logs to best understand the error. Based on the log information, replace
the appropriate component. This sense key is logged each time it is reported.
5h
Illegal Request.
The requested command had an incorrect parameter defined
and you will need to review the actual command and parameter to determine
what was wrong. This is not logged in the drive logs.
6h
Unit Attention.
A condition exists that impacts the drive's functionality.
Examples include a SCSI Bus reset, or a transition from Ready to Not Ready. A
reset is required because Mode Page setting may change after a reset and the
host will need to know that. This sense key is not logged in the drive logs.
7h
Data Protected.
The media currently in the drive is write-protected. This can be a
hardware write protect or software. This sense key is not logged in the drive
logs.
8h
Blank Check.
While reading, writing, or doing a search on the media that the
drive encountered a EOD mark or a long gap was detected. A long gap may be
the result of a drive stopping the write command without doing the proper
command termination. This sense key is not reported in the drive logs.
Bh
Aborted Command.
Command aborted. Generated when the drive aborts a
command.
Dh
Volume Overflow.
The tape drive has reached the physical EOT and can no
longer write data to the tape. This sense key is not reported in the drive logs.
Eh
Miscompare.
During the drive self tests, the drive detected a data miscompare
while executing the internal test. This error would be an indicator that the drive
should be returned for repair.
Sense Key Definition