Freecom Quantum SuperLoader 3, Руководство пользователя, Страница: 56 / 230

Chapter 3 Operating the Autoloader
Running an Inventory
38 SuperLoader 3 Autoloader User’s Guide
Viewing Ethernet
Information
3
To view the Ethernet information, use the following procedure.
1
From the main menu, scroll to
Status
, and then press
Enter
.
2 From the
Status
submenu, scroll to
Ethernet
, and then press
Enter
.
A list of messages appears. These messages may include:
Table 6 Ethernet
Information Fields
Running an Inventory
3
The autoloader automatically runs an inventory whenever you power it
back on or insert a magazine. An inventory checks each magazine slot,
the drive, the picker, and the mailslot to determine if a cartridge is
present. If so, it also reads the bar code label, if available. If you need to
run an inventory in addition to this, you can do so manually.
To perform an inventory manually:
1 From the main menu, scroll to
Commands
, and then press
Enter
.
2 From the
Commands
submenu, scroll to
Inventory
, and then press
Enter
. The autoloader scans the bar codes of all the cartridges present.
Field Description
MAC Address Indicates the unique network identifier associated
with the autoloader.
IP Address indicates the static IP address or currently assigned
dynamic IP address. The text
DHCP
displays in this
case.
Network Indicates whether the autoloader is connected to the
network or not and at what speed.
Note:
No bar code labels can be read if there is a tape in the picker.