Freecom Quantum SuperLoader 3, Руководство пользователя

Страница: 46 / 230

Chapter 3 Operating the Autoloader
Using Cartridges
28 SuperLoader 3 Autoloader User’s Guide
After
Load cartridge
appears on the LCD, you have 20 seconds to load
a cartridge through the mailslot before it relocks. The autoloader
automatically loads the cartridge into the selected slot.
5 Once you have inserted the cartridge, the prompt
Enter to Continue
appears. You have 20 seconds to press
Enter
in response.
Moving a Single
Cartridge
3
You can easily move a single cartridge from one location to another
inside the autoloader.
1
From the main menu, scroll to
Commands
, and then press
Enter
.
2 From the
Commands
submenu, scroll to
Move
, and then press
Enter
.
The
Move
screen appears under
From:
. Scroll to the current location of
the cartridge you want to move. Slots that are occupied by a data
cartridge are indicated by an asterisk (
*
).
3 From To: , scroll to the location to which you want to move the
cartridge. Slots that are occupied by a data cartridge are indicated by
an asterisk (
*
). Press
Enter
.
4 Press
Enter
.
If you select an empty location,
No Source Element
appears on the
LCD. Choose a different location.
If you select a location that is already occupied,
Destination Full
appears on the LCD. Choose a different location.
Ejecting a Single
Cartridge
3
When you want to remove a single cartridge from the autoloader, you
can specify the cartridge you want by bar code or location, or choose the
cartridge currently in the tape drive.
To eject a cartridge by bar code (if you have a bar code reader):
1
From the main menu, scroll to
Commands
, and then press
Enter
.
2 From the
Commands
submenu, scroll to
Eject
, and then press
Enter
.
3
From the
Eject
submenu, scroll to
Tape,
scroll to
Mailslot
, and then
press
Enter
.
Note: If the load cartridge function fails, the cartridge ejects and
you will have to perform steps 3 and 4 again.