Freecom Quantum SuperLoader 3, Руководство пользователя, Страница: 74 / 230

Chapter 4 On-board Remote Management
Commands Page
56 SuperLoader 3 Autoloader User’s Guide
Commands Page
4
You can move tapes, run a system inventory, reset the picker to its home
position, or perform sequential operations from the
Commands
page.
When you click
Commands
, the page displays.
From a remote location, you can request that a tape be moved from one
position to another. To move a tape:
1 From any page, click the
Commands
heading. The
Commands
screen
displays.
2 From the
Moving Tapes
section of the page, click the drop-down
menu under
From:
and select the current location of the tape that you
want to move.
3
From the drop-down menu under
To:
, select the location to which
you want to move the tape, and then click
submit
.
Inventory 4 The autoloader automatically runs an inventory whenever you power it
on or insert a magazine. If you need to run an inventory in addition to
this, you can use On-board Remote Management to do it remotely. To
run an inventory:
1
From any page, click the
Commands
heading. The
Commands
screen
displays.
2
From the
Commands
page, click
Inventory
. The autoloader starts an
inventory immediately.
Set to Home 4 If the autoloader is not able to successfully execute a
Moving Tapes
or an
Inventory
command, try executing a
Set to Home
command, and then
retry the move or inventory command again.
The
Set to Home
command resets the autoloader as a means to help the
autoloader recover from an unexpected internal condition. To set to
Home
:
Note: You can also click the slot on the graphic of the autoloader
magazine to select and move a cartridge.