Freecom Quantum SuperLoader 3, Руководство пользователя

Страница: 83 / 230

Chapter 5 Administration
Configuring the Autoloader
SuperLoader 3 Autoloader User’s Guide 65
3 From the
Ethernet
submenu, scroll to
Set Gateway
, and then press
Enter
. The cursor automatically appears at the first digit.
4
At each position of the gateway address, use the up and down arrows
to change the value of each digit. Press
Enter
to advance the cursor to
the next digit.
When you have advanced through all of the digits of the gateway
address, the autoloader displays
Enter to save.
5 Press
Enter
.
New Gateway is xxx.xxx.xxx
appears on the LCD. You do
not need to reboot the autoloader.
6
Press
Escape
or
Enter
to return to the Ethernet submenu.
Setting the SNMP
Server
5
An SNMP server monitors a network by processing reporting activity in
each network device (hub, router, bridge, and so on). The server uses this
information to define what is obtainable from each device and what can
be controlled (turned off, on, and so on).
To set an SNMP server:
1 From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Ethernet
, and then press
Enter
.
3 From the
Ethernet
submenu, scroll to
Set SNMP Server
, and then press
Enter
. The cursor automatically appears at the first digit.
4 At each position of the SNMP server address, use the up and down
arrows to change the value of each digit. Press
Enter
to advance the
cursor to the next digit.
When you have advanced through all of the digits of the SNMP
server address, the autoloader displays
Enter to save.
5 Press
Enter
.
New SNMP Server xxx.xxx.xxx
appears on the LCD. You do
not need to reboot the autoloader.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.
Note: If you make a mistake, press
Escape
to backspace to the
digit you want to change.