Free Hot Water Freedom 5002, Инструкция по установке, эксплуатации и обслуживанию

Страница: 48 / 59


Page 48
Eye Contact: Irritation may result.
Skin: No significant signs or symptoms expected.
Inhalation: This material is not expected to be a respiratory hazard except if aspirated. If swallowed, can enter lungs
and cause damage.
Ingestion: If more than several mouthfuls are swallowed, abdominal discomfort, nausea, and diarrhea may occur.
Aspiration during ingestion or vomiting may cause lung damage.
Emergency and First Aid Procedures
Eyes: Flush with water for at least 15 minutes.
Skin: Flush with water, wash with mild soap if available.
Inhalation: Remove to fresh air.
Ingestion: DO NOT induce vomiting, aspiration may cause lung damage; seek medical attention.
Spill or Leak Procedures
STEPS TO BE TAKEN IN CASE THE MATERIAL IS SPILLED OR RELEASED:
This liquid is biodegradable but large spills may contaminate public waters. Prevent flow to sewers/public waters.
Restrict clean up water use. Notify water supply environment authorities. Impound/recover large land spills. Soak up
small spills with absorbent material. Use suitable disposal containers. High biodegradability can stimulate algae
growth. Dispose residue to reduce possible aquatic harm.
WASTE DISPOSAL METHOD: Consult with local sewer, municipal, state and/or federal agencies to determine
appropriate current disposal options.
Special Protective Information
RESPIRATORY PROTECTION: Normally not required.
VENTILATION: None needed under anticipated conditions of normal use beyond that needed for normal comfort
control.
PROTECTIVE GLOVES: If contact with hot liquid possible use suitable protective gloves.
EYE PROTECTION: If contact with hot liquid possible use suitable splash goggles and face shield.
OTHER PROTECTIVE EQUIPMENT: Not applicable
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Follow good work/hygiene practices. Provide safety shower and wash in immediate area. Workers should wash with soap and water before
eating, smoking or using toilet facilities. Launder contaminated clothing before re-use.
Note to physician: No specific antidote. Supportive care. Treatment based on judgment of the physician in response to the reaction of the
patient.
Notice: No freedom from any patent owned by Seller or others is to be inferred. Because use conditions and applicable laws may differ from one
location to another and may change with time, Customer is responsible for determining whether products and the information in this document
are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and
other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN: ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
SAFE-T-THERM
®
Propylene Glycol Heat Transfer - Fluid Class II
DESCRIPTION
SAFE-T-THERM
®
heat transfer fluid is an inhibited propylene glycol designed for use in hydronic systems. The
inhibitor system is designed to protect metals commonly found in residential and commercial installations such as
brass, copper, solder, steel, and cast iron. The SAFE-T-THERM
®
formula also includes an orange dye, for leak
detection, and an antifoam to minimize foaming during service. The effectiveness of SAFE-T-THERM
®