Free Hot Water Freedom 5002, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 59


Page 22
Flat Roof Installation Instructions
1. Locate and mark the roof rafters into which the solar collector mounting Frame will be mounted
(one way to find rafters is to see the “tails” at the edge of the roof).
2. To create a set point for plumbing and level installation, measure the distance from the edge of
the roof to the desired mounting points and mark the points where the collector mounting frame
(fig 2.2) will be installed (fig 2.1).
Fig 2.2
Fig 2.3
Fig 2.1
1. Follow the plumbing connections ( Blue for Supply and Red for return) Determine where penetration
will be to connect the solar hot water collector with the storage tank and/or the water supply (use 2
pre-insulated stainless steel flex hoses or 2 insulated copper pipes for that connection).
2. Once the frame(s) are attached to the roof, install the profiles as per fig 2.3
3. Proceed installing the collectors using the M8 screws provided with the frame kit as per the illustrated
in fig 2.4
Fig 2.4