Free Hot Water Freedom 5002, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 59


Page 19
Fig 1.5 Fig 1.6 Fig 1.7
10. Pre drill mounting bracket screw holes into rafter or other appropriate mounting substrate (one hole
per bracket) using a 7/16” drill bit.
11. FOR ONE BOTTOM BRACKET ONLY, apply Solarflex in bracket screw holes, on roof surface where
bracket will be placed, and on bracket surface that will be facing down. Fasten first bottom bracket
only to rafter or substrate using ½” screw.
Note: *begin installing second bottom bracket only after confirming level installation.
12. Follow Steps 8-11 for the second bottom bracket BUT DO NOT YET FASTEN THE SECOND BRACKET
WITH SCREW.
13. WITHOUT TIGHTENING IT COMPLETELY, place the bottom profile on the bottom brackets using the
clamps and ½” bolts.
14. Using a 4’ level, make sure the profile is level.
15. Once the profile is level, remove it and fasten the second bottom bracket to the roof using ½” screw.
Fig 1.8
16. Apply AT 302-60 (recommended, not supplied-FHW-AA 60050)to ½” bolts for clamps. Fasten Clamps to
brackets using ½” bolts and washers. Attach profile to clamps, tighten completely.
17. Follow steps 1-16 for top mounting brackets.