4. Operational status indication
Four red LEDs above the keypad indicate the status of the drive.
- indicates status "RUN" or "STOP", i.e. the activation of the output power bridge
light on
: the output power bridge is active (status "RUN")
RUN
light off : the output power bridge is inactive (status "STOP")
- indicates actual control mode
light on : local (keypad) control mode
LOC
light off : remote (terminals) control mode
- FWD, REV indicate the actual and required direction of motor rotation
light on : the actual direction
light flashing : the required but not actual direction of rotation (light of the actual
FWD
REV
direction remains on)
5. Functional keypad description
5.1. Parameters setting keys
Parameters and their values are adjusted by the three keys :
UP
DOWN
The keys UP/DOWN enable :
•
selection of parameter code from parameter menu
•
parameter value changing
•
speed control in local (keypad) control mode
NOTE :
- a single keystroke changes the value step by step, depending on
displayed value resolution
- press and hold the key for faster fluent changes
PAR
menu / value
The key "PAR" switches between menu-code and actual value of the selected parameter.
Press the "PAR" key to switch to parameter menu. The display will show the actual parameter
code.
Shift in menu using UP/ DOWN keys to see the menu-code of selected parameter.
Press the "PAR" key to display the actual value of selected parameter.
Using UP/DOWN keys change the active parameter setting to required value.
To resume another parameter adjustment, press the "PAR" key again to return to menu.
2
