F3D3
Series
Service Manual Customer Level Programming / 1.8
Questions? Call Franke Technical Support Group For Your Area.
Page 1
Copyright
2012 Franke, Inc. All rights reserved.
Customer Level Access
All F3D3 Series Fries Dispensers provide
easy access to Customer-Level operating
and diagnostic parameters, using the lane
operator-interface touch panels & displays.
For customer-level programming access:
1)
Leave unit plugged in.
2)
Turn Main Power Switch
ON
.
3)
Lane power must be
OFF
. Display will
show current freezer temperature.
To Access Customer Level Programming Functions:
Step
Action Required
Resulting Display
1
From Standby condition use 3
rd
touchpad and
enter:
3-3-3-3
. [Entry code]
Special Mode Select
Cust Fact Exit
2
Press touchpad 1 = Cust
[omer]
See Page 2 Table for language options.
Customer Access
Set Language ?
Prev OK Next
3A
Press touchpad 2 = OK [To change language]
or
Press touchpad 3 = Next [See next function]
Customer Access
Set Temp Cntrl
? [Control]
Prev OK Next
3B
Press touchpad 2 = OK [To change set temp]
or
Press touchpad 3 = Next [See next function]
Customer Access
Calibrate ?
Prev OK Next
3C
Press touchpad 2 = OK [To calibrate load cell]
or
Press touchpad 3 = Next [See next function]
Customer Access
Test Motors ?
Prev OK Next
3D
Press touchpad 2 = OK [To test motors]
or
Press touchpad 3 = Next [See next function]
Customer Access
View Statistics ?
Prev OK Next
3E
Press touchpad 2 = OK [To view statistics]
or
Press touchpad 3 = Next [See next function]
Customer Access
Exit ?
Prev OK Next
3F
Press touchpad 2 = OK [To exit]
or
Press touchpad 3 = Next [Goes back to Set Language]
See Page 2 Customer Function Guide for Sub-Menus & Options
Rev. 1 6/2012
NOTE: All programming is done using the
three choice buttons labeled: 1, 2 and 3 above.
1
2
3
