![background image](http://html1.mh-extra.com/html/franke/2000101087/2000101087_installation-and-operating-instructions-manual_2327839020.webp)
20
ZMI
_001_
2000
1010
87-ZAQ
U
A09
1_#S
EN_#A
QU_#V
5.f
m
☞
By default, the parameter is set to code 1.
• The LED in the sensor of the fitting confirms the entered code
– LED flashes briefly = unit digit
– LED flashes long = tens digit
Stopping thermal disinfection
11.22
Press the
OFF key.
• The LED in the sensor flashes with 1s intervals
• If the fitting is in the exposure phase, the cooling phase starts immediately.
• If the fitting is in the cooling phase, the solenoid valves are closed immediately.
Thermal disinfection emergency-stop
11.23
Press key
OFF 2 times.
• The LED in the sensor does not flash.
Exiting from TD Mode
11.24
Press and hold the RESET key.
11.25
Additionally press the
OFF key within 2s.
• The LED flashes 4 × briefly.
or
if thermal disinfection is being performed, wait for the end of the disinfection process.
Resetting default factory settings (Reset)
11.26
Press the RESET key for at least 3 s.
• The system now has the factory settings again.
• The LED flashes briefly 4 × short (2 × in succession).
Safety time-window
0 h
0.5 h
1 h
2 h
4 h
Start delay
10 sec
1
6
11
16
21
30 sec
2
7
12
17
22
1 min
3
8
13
18
23
2 min
4
9
14
19
24
3 min
5
10
15
20
25