![background image](http://html1.mh-extra.com/html/franke/2000101087/2000101087_installation-and-operating-instructions-manual_2327839010.webp)
10
ZMI
_001_
2000
1010
87-ZAQ
U
A09
1_#S
EN_#A
QU_#V
5.f
m
Resetting default factory settings (Reset)
9.24
Press the RESET key for at least 3 s.
• The system now has the factory settings again.
• The LED in the sensor of the fitting flashes:
– 4 × short, 3 × short, 3 x short
Changing the type of detection (only for on-wall washbasin mixer installation)
Water flow should start/stop when a hand approaches/moves away from the
sensor (3-7 cm).
9.25
Press the "
–" key repeatedly until the minimum sensor range is reached.
• The LED in the sensor of the fitting flashes:
– 2 × long
9.26
Press the "
–" key again.
• The type of detection has been changed. The sensor only responds when a hand
approaches/moves away. The range can be adjusted (see
• The LED in the sensor of the fitting flashes:
– 5 × long, 3 × short
Water flow should start/stop when a person approaches/moves away from the
sensor (>35 cm).
9.27
Press the "
+" key repeatedly until the maximum sensor range is reached.
• The LED in the sensor of the fitting flashes:
– 2 × long
9.28
Press the "
+" key again.
• The type of detection has been changed. The sensor only responds when a
person approaches/moves away. The range can be adjusted (see
• The LED in the sensor of the fitting flashes:
– 5 × long, 3 × short
Resetting the type of detection to the default factory setting
9.29
Press the RESET key.