![background image](http://html1.mh-extra.com/html/franke/2000101087/2000101087_installation-and-operating-instructions-manual_2327839009.webp)
9
ZMI
_001_
2000
1010
87-ZAQ
U
A09
1_#S
EN_#A
QU_#V
5.f
m
Adjusting flushing duration – Protronic C, Protronic T
The flushing duration can be set at one minute intervals from 1 to 10 minutes.
☞
The flushing duration is factory-set to 5 minutes.
9.18
Press the TEST key.
9.19
Use the + and – (
) keys to adjust the flushing duration in individual steps.
• The LED in the sensor of the fitting flashes:
– 4 × short = adjustment by one stage (approx. 1 minute).
– 2 × long = End setting reached.
9.20
Exit the adjustment mode.
• Press the TEST key.
or
• Wait 60 seconds.
Adjusting flushing duration – Protronic S
The flushing duration can be set as follows:
– 10 s
– 30 s
– 60 s
– 2 min
– 3 min
– 5 min
– 7 min
– 10 min
☞
The flushing duration is factory-set to 10 seconds.
9.21
Press the TEST key.
9.22
Use the + and – (
) keys to adjust the flushing duration in individual steps.
• The LED in the sensor of the fitting flashes:
– 4 × short = Adjust by one step.
– 2 × long = End setting reached.
9.23
Exit the adjustment mode.
• Press the TEST key.
or
• Wait 60 seconds.