manualshive.com logo in svg

Fractal Audio axe-fx ultra, Руководство пользователя

Поделиться
Скачать
Fractal Audio axe-fx ultra Скачать руководство пользователя страница 94

Utilities

91

Utilities

The Utilities menu consists of the

 LCD, PRESET, STATUS, RESET 

and 

FIRMWARE

 pages.

LCD

On this page you can adjust the contrast of the LCD.

Preset

Preset Dump

These functions allow you to save presets to a MIDI librarian (or MIDI librarian software on a PC). 
Connect 

MIDI OUT

 to the MIDI librarian device. To save a preset simply recall the desired preset, 

select the function and press 

ENTER

. The preset data is dumped in SysEx format.

To restore a preset from a MIDI librarian connect the device to 

MIDI IN 

and send the SysEx data 

into the Axe-Fx. The Axe-Fx automatically loads the data into its edit buffer. You can then save the 
downloaded data to the location of your choice.

To dump a bank of presets simply select the desired bank to dump and press 

ENTER

. Bank A 

contains presets 0 through 127, Bank B contains 128 through 255 and Bank C contains presets 256 
- 383. It may take several minutes to dump all the data in a bank. When saving the data to your 
librarian device (or PC) be sure to name the saved data to indicate the bank in which the data 
originated (i.e. BankA.syx). This will eliminate confusion if the need arises to restore a bank.

It is good practice to back up your presets regularly just as it’s good practice to back up the data on 
your computer.

To restore a bank of presets connect the MIDI librarian to 

MIDI IN 

and send the SysEx data to the 

Axe-Fx. The Axe-Fx automatically recognizes the data as a Bank Dump and loads the data into its 
battery backed memory. CAUTION: THIS WILL OVERWRITE ALL DATA IN THE BANK.

Data from one Axe-Fx can be loaded into another Axe-Fx using this same method. Simply connect 
the 

MIDI OUT

 of the first Axe-Fx to the 

MIDI IN 

of the second. A bank from the first unit can 

then be loaded into the second unit.

Preset Update

This function allows you to update all presets to the latest protocol. The Axe-Fx can read presets 
stored in either the current version or one version prior. When a preset is saved it is saved in the 
latest protocol. If you’ve just updated the firmware to a major revision you can convert all your 
presets to the latest protocol by using this function.

Содержание axe-fx ultra






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды