manualshive.com logo in svg

Fractal Audio axe-fx ultra, Руководство пользователя

Поделиться
Скачать
Fractal Audio axe-fx ultra Скачать руководство пользователя страница 73

The Effects

70

• 

4x12 Brit

 - Based on the sound of modern British cabinets equipped with “vintage” mid-power 

drivers.

• 

4x12 20w 

- Captures the essence of the early British 4x12 speaker cabinets with their low-

power drivers and unique response.

• 

4x12 25w 

- Based on the sound of the British 4x12 cabinets prevalent in the 1970's.

• 

4x12 75w 

- Based on the sound of the British 4x12 cabinets prevalent in the 1980's. A good 

match for the Metal or Hellbeast Amp Simulations.

• 

4x12 30W

 - Based on the sound of a newer 4x12 cabinet with reissue 30W speakers.

• 

2x12 Tweed 

- Based on the sound of two classic American 12” speakers in a tweed covered 

cabinet.

• 

4x12 Green

- Based on a 4x12 cabinet with legendary “Greenback” speakers.

• 

2x12 Blue

- Based on the sound of two classic American 12” speakers with blue labels.

• 

USER n

- Selects one of the user IR slots (see below).

MIC L/R - 

Selects the microphone simulation type. There are eight different types based on classic 

microphones that are popular for micing guitar cabinets.

LINK - 

When ON, the right channel speaker and mic type change when the left channel type is 

changed allowing for quick evaluation of the various types. You can still override the right channel 
types if desired.

LEVEL L/R - 

Sets the output level for the left and right speaker/mic.

PAN L/R - 

Sets the output panning of the speaker/mic. Each speaker/mic combo can be panned in 

the stereo field. By default they are panned 25% from full left/right. Adjust this control to obtain 
the desired amount of separation.

DRIVE - 

Sets the input drive level. This can be used to simulate speaker break-up.

User Cabinets

The Axe-Fx has the ability to import cabinet impulse responses (IR’s) and use them instead of the 
internal models. The responses may be loaded into the Axe-Fx non-volatile memory via a MIDI 
utility. Once loaded, you can select which IR to use with the 

TYPE

 control.

Drive

The drive block replicates the effect of classic “stomp boxes”. They range from sublime to intense. 
Use caution when putting a drive before a high-gain amp as excessive noise and squealing may 
occur. Drives work best before low and medium gain amps.

Содержание axe-fx ultra






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды