Getting Set Up
15
As an Effects Unit with a Combo Amp (or Head and Cab)
Below are two possible configurations for using the Axe-Fx with a combo amp (or head and
cabinet). In the first configuration the Axe-Fx is simply used in the effects loop of the amp. The
second configuration is more complicated but allows effects both before and after the amp’s preamp
stage. In this configuration you are using the amp in the Axe-Fx’s effects loop.
As a Preamp / Processor Into a Power Amp and Guitar Cabinet(s)
In this configuration the Axe-Fx is providing all distortion and tone-shaping. The output of the Axe-
Fx is connected to a power amp and cabinets equipped with guitar speakers. Since the cabinets are
not full-range, the cabinet simulation in the Axe-Fx should be defeated. This can be done globally
via the
GLOBAL
menu, or per-preset by bypassing the cabinet block or removing it from the signal