![Fractal Audio axe-fx ultra Скачать руководство пользователя страница 77](http://html1.mh-extra.com/html/fractal-audio/axe-fx-ultra/axe-fx-ultra_user-manual_2326271077.webp)
The Effects
74
PITCH TRACK -
Setting this to
ON
instructs the pitch shifter to track the pitch of the input. For
single note work this provides improved results. For chordal work this should be set to
OFF
as the
pitch tracker obviously cannot determine the pitch of simultaneous tones.
TRACK ADJUST -
This control allows fine-tuning the pitch shifter “splice length”. For large shifts
this control can help improve the quality of the shifted note.
Intelligent Harmony
The Intelligent Harmony mode creates two voices that track the note you’re playing and remain
within the key.
MASTER DELAY -
Multiplies the delay values by this amount.
MASTER PAN -
Multiplies the pan values by this amount.
MASTER LEVEL -
Multiplies the level values by this amount.
VOICE1,2 DETUNE -
Sets the detune amount of the voice in cents. The range is +/- 50 cents. You
can attach a controller to the detunes by pressing enter.
KEY -
Sets the key that the harmony will be in.
SCALE -
Sets the type of scale (or scale mode) that the harmony will use. Examples are Ionian
(major), Aeolian (minor), Whole Tone, etc. Set to
CUSTOM
to use custom scale tones (see below).
TRACK MODE -
Sets mode in which the harmony will track the input.
SMOOTH
allows the
harmony note to follow bends and vibrato in the input.
STEPPED
locks the harmony to the nearest
chromatic tone.
TRACKING -
Controls the tracking of the pitch shifter. Adjust for best sound. Higher values tend
to sound better for higher shifts and vice-versa.
GLIDE TIME -
Sets the rate at which the harmony moves from the existing pitch to a new pitch.
VOICE1,2 HARMONY -
Sets the scale degree the voice will sound.
VOICE1,2 DELAY -
Sets the delay time of the voice in milliseconds.
VOICE1,2 DLYTEMPO -
Locks the delay time to the global tempo. For example, if the global tempo
is 120 bpm and the tempo is set to a quarter note (1/4) then the delay time will be 500 ms. To ignore
the global tempo set the tempo control to
NONE
.
CUSTOM NOTES -
Sets the number of notes when using a custom scale. Custom scales can have
between four and eight notes.
TONIC -
Sets the reference note for entering the custom scale. This is not a stored parameter and
only serves to aid in defining the custom scale. Setting this to “C” allows defining your custom scale
with C as the tonic. The actual key that the harmony will be in is set using the KEY parameter.