![Fractal Audio axe-fx ultra Скачать руководство пользователя страница 54](http://html1.mh-extra.com/html/fractal-audio/axe-fx-ultra/axe-fx-ultra_user-manual_2326271054.webp)
The Effects
51
LOCUT FREQ -
Sets the cutoff frequency of the lowcut filter. Higher values remove more low
frequency content from the delayed signal.
HICUT FREQ -
Sets the cutoff frequency of the highcut filter. Lower values remove more high
frequency content from the delayed signal.
Modulation
The
MOD
page contains the various dynamic parameters that can be adjusted.
LFO1/2 TYPE -
Sets the type of LFO for the delay time modulators.
LFO1/2 TARGET -
Sets which delay line(s) the LFO will modulate. You can select to modulate left,
right or both.
LFO1/2 RATE -
Sets the rate of the time modulators. The delay time can be modulated so as to
simulate a worn capstan or belt or to add a chorus effect to the echoes.
LFO1/2 DEPTH -
Sets the depth of the time modulators. Use in conjunction with the rate controls.
DEPTH RANGE -
The modulators use “auto depth”, faster rates automatically decrease the depth
and vice-versa. The
DEPTH RANGE
control allows selecting the amount of maximum depth.
DUCKER -
Turns the delay ducking on or off. Ducking reduces the volume of the delayed signal in
response to your playing. The volume of the echoes then increases when you stop playing.
ATTENUATION -
Sets the attenuation depth of the ducker. A setting of 20 dB, for example, will
decrease the echoes by 20 dB when the input level is above the threshold.
THRESHOLD -
Sets the trigger threshold of the ducker. If the input signal exceeds this value the
delayed signal will be attenuated by an amount equal to that set with the
ATTENUATION
control.
RELEASE TIME -
Sets the rate at which the ducker releases the attenuation when the input signal
falls below the threshold.
DIFFUSION -
Sets the amount of echo diffusion. This causes the echoes to get “fuzzy” and can be
used to smooth the echoes
DIFF TIME -
Sets the delay time for the diffuser.
PHASE REV -
When set to
ON
, inverts the phase of the right channel. This can be used to widen the
stereo effect.
Looper
The Looper is a sixteen second phrase sampler. The Looper controls are different than the other
effects in that they are “pushbutton” controls rather than knobs. Selecting the control and pressing
ENTER toggles the state of the control. The Looper controls have dedicated MIDI CC assignments
as well so you can control the Looper using a MIDI footpedal or other MIDI device. Access to the
CC assignments is done in the I/O menu.