26
2.
Access the main menu by pushing and holding the “Menu/Select” but
ton for about 3-
4 seconds.
3.
Locate the menu item that says “Remote Channel” and make note of this value. You
need to verify that this is the same channel as the XWave remote.
4.
Changing this value is done by highlighting the “Remote Channel” menu item and
the
n pushing the “Menu/Select” button. You can then cycle through the available
channels (0-15) until you find the correct one (must match the remote).
5.
When the proper channel is selected, push the “Menu/Select” button to lock it in.
XWave Remote Channel of Operation:
1.
Turn on the XWave remote.
2.
Access the main menu and select the “TX1000 Settings” menu item.
3.
“Radio Channel” will be the first option. The channel will be shown to the right of the
text. This needs to be the same value that is set for the XWave.
4.
T
o change the channel, highlight “Radio Channel” and then push the “Play/Select”
button. Then use the scroll buttons to cycle through the available channels (0-15).
5.
When the proper channel is selected, push the “Play/Select” button to lock it in.
4-8
Playing Sounds with the Remote
The first operation that most users want to perform is playing sounds. There are multiple
methods in which you can initiate sound playback. Before attempting to play sounds, be sure
that the XWave and XWave remote both have fresh batteries installed and that both devices
are powered-on.
There are two sound view mode options within the XWave remote; Sound List and Categories.
This is configured through the TX1000 Settings item in the main menu. The method of playing a
sound is identical for both modes; the way the sounds are displayed on the screen is the only
difference. By default, the XWave remote is setup to display the sounds by categories.
To change how the sounds are displayed, access the TX1000 Settings menu and locate the menu
item
titled “View”. Highlight “View” and the push the “Play/Select” button
a single time. Use
the scroll buttons to cycle through either “Sound List” or “Categories”.
When you decide which
option you would prefer to use, push the
“Play/Select” button to lock it in.
Default: Categories View
When the XWave remote is turned on, the main screen will be displayed. The first item is
“Favorites/Presets” followed by “FOXCAST”. The next menu item marks the beginning of the
category listings. In category list mode, your sounds will not be displayed as one long list, but
rather as elements of defined categories. You can have up to 50 unique categories. Use the
Scroll Buttons to browse through the available categories. Highlight the category you wish to
browse and push the “Play/Select” button to enter the category. All sounds associated with
that category will be displayed. Find the sound you wish to play, and then push the
“Play/Select” button to begin playback of the sound
. Unless you changed the volume prior to
Содержание XWave
