Foxpro XWave, Инструкция по эксплуатации

Страница: 20 / 64

20
3-12 Integrated Mini USB Port
The XWave features a mini USB port. The port is located beneath the charger and external
speaker jack towards the left side of the front plate. This port allows you to connect a mini USB
cable from the XWave to a USB port on a computer for performing such tasks as loading
FOXCAST sequence files and reprogramming sounds. Both of these topics will be covered in a
later Section.
IMPORTANT NOTE
When connecting the XWave to a home computer, make sure that the power is turned off.
4. XWave Remote Operation
This section covers all aspects of the XWave remote control.
IMPORTANT NOTE
The XWave remote control is not intended to operate the caller at distances shorter than 1
meter (3 feet). If the remote is located too close to the caller, proper operation cannot be
ensured.
4-1 What are FOX FEATURES?
Throughout this section, you will be introduced to a set of features that are referred to as FOX
FEATURES. These features include FOXBANG, FOXCAST, FOXMOTION, FOXPITCH, FOXGRIP, and
FOXDATA. These features will be explained in full detail as encountered through the manual.
4-2 Turning on the XWave Remote
After installing batteries as indicated in Section 1 (pg. 12), you can turn on the XWave remote
by pushing and holding the power button for approximately 1-2 seconds. An initial startup
screen will appear showing the FOXPRO logo and remote version information. After the startup
screen clears, the main sound selection screen will appear.
4-3 Navigating the XWave Remote
The XWave remote has a scroll up and scroll down button for cycling through the on-screen
display. A selected menu item is highlighted with a horizontal bar and, by pressing the scroll up
or down arrow button, that horizontal bar will move up or down through the menu items list.
To make menu selections, use the “Play/Select” button. The “Back/Menu” button allows you to
access the XWave Remote menu configuration and step back one level in the menu system.