Foxpro XWave, Инструкция по эксплуатации

Страница: 25 / 64

25
Alarm (min) Set the duration for the alarm. 1 minute – 60 minutes
Time Set the current time Hours/Minutes
Date Set the current date Month/Day/Year
Time Format Set 12 or 24 hour time formats 12 Hr, 24 Hr
Date Format Set the desired date format m/d/y
d.m.y
y-m-d
TX1000 Settings Menu
This menu item provides access to other remote configurations, radio channel settings, and
sound display modes.
Menu Item Description Values
Radio
Channel Sets the channel of radio operation. Must be the
same channel as the XWave digital game call 0 – 15
Download List Invokes wireless transmission of sound list N/A
AUX Configure auxiliary function. FOXPRO’s Jack
Predator Decoys require Momentary.
Momentary, Latched
View Sets the sound view mode. Categories, List
Temp. Units Configure the temperature units of
measurement F, C
Barom. Units Configure the barometer units of measurement In, mm
Elevation Set your elevation above sea level 0 – 19,717 ft.
About Info Displays system information N/A
Restore
Defaults XWave remote factory reset N/A
4-6 Smart Light
With Smart Light technology, you have the ability to control your FOXPRO hunting light with the
XWave remote control. Instructions on how to connect to and control the light are outlined in
the manual that is included with the
light.
4-7 Verifying Channel of Operation
Prior to attempting remote controlled operation, it is important that you first verify that both
the XWave and XWave remote are set to operate on the same channel. If the two devices are
not on the same channel, then radio communication will not be possible.
XWave Channel of Operation:
1. Turn on the XWave.