111
Model D2424LVmkII Reference Manual (Changing the Initial Settings <SETUP mode>)
Flashing
<Caution>:
If modifying or deleting the stored
time signature causes the bar/beat setting for
the tempo specified in the “
Setting a tempo
” menu
to disappear, the tempo setting will also be
automatically erased.
To cancel the setting operation, or to exit SETUP
mode after storing data, press the
[STOP]
button
or the
[EXIT/NO]
key. Each time you press one of
these keys, the recorder returns to the previous
hierarchy level of the menu, and finally exits
SETUP mode.
Clearing all time signature and tempo settings
<Caution>:
Using this function will erase not only the
time signature setting but also the tempo data specified
in the “
Setting a tempo
” menu described in the next
section.
(1)
Repeat steps 1-3 described in the “Storing a time
signature” section.
(2)
While the measure number is flashing, turn the Jog
dial counter-clockwise to select “All Clear?.”
When “
All Clear ?
” appears, “
SURE ?
” flashes, and
you can clear the time signature and tempo data in
the next step.
(3)
Press the [EXECUTE/YES] key.
The stored time signature and tempo data in its
entirety are cleared, and the initial settings are
restored.
(4)
Press the [EXIT/NO] key (or [STOP] button).
To cancel the All Clear operation, press the
[STOP]
button or the
[EXIT/NO]
key now. Each
time you press one of these keys, the recorder
returns to the previous hierarchy level of the
menu, and finally exits SETUP mode.
Changing the bar at ABS “0” of the time base
Bar in -002bar/1beat/00clk, which indicates the head
figure of the disk in the time base BAR/BEAT/CLK, can be
changed. Although the initial figure is -002bar, this can
be set within the range of -009bar ~ -002bar.
Flashing
(1)
Repeat steps 1-2 described in the “Storing a time
signature” section.
(2)
Turn the Jog dial counter-clockwise to select
“-002 bar Offset.”
(3)
Press the [EXECUTE/YES] key.
“
2
” in “
-002bar
” will flash and the bar figure can be
changed with the
Jog
dial (Numbers that can be
input are 2~9.)
(4)
Use the Jog dial to enter a new value.
(5)
Press the [EXECUTE/YES] key.
(6)
Press the [EXIT/NO] key (or [STOP] button).
To cancel the setting operation, or to exit SETUP
mode after storing data, press the
[STOP]
button
or the
[EXIT/NO]
key. Each time you press one of
these keys, the recorder returns to the previous
hierarchy level of the menu, and finally exits
SETUP mode.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
SURE?
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
