Fostex D2424LVmk2 Скачать руководство пользователя страница 112

Страница: 112 / 158

112

Model D2424LVmkII Reference Manual (Changing the Initial Settings <SETUP mode>)

Modifying (or deleting) stored tempo settings

(1)

Repeat steps 1-3 described in the “Storing a tempo
value” section.

(2)

Turn the Jog dial to select bar/beat to edit or delete.

(3)

Turn the Shuttle dial so that the flashing cursor is
on the TEMPO number.

(4)

Use the Jog dial to enter a new value.

Entering “- - -” deletes the data at the selected bar/
beat.

Flashing

Setting a tempo

The “

Setting a tempo

” menu enables you to specify a

tempo at a given point in a song that already has a
time signature setting. For example, you can specify
a tempo of 150 to the third beat of the 12th measure.
Time signature and tempo settings make a Tempo
Map, which is used by the recorder to manage the
song using the BAR/BEAT/CLK Time Base, and enable
the Metronome function. Tempo settings as well as
time signature settings are required when you wish
to output MIDI clock and Song Position Pointer to
an external sequencer.

<Note>:

The tempo set figure setup here is an

approximate figure and not 100% accurate. Therefore,
although the tempo map be matched to a personal
computer, they will gradually drift apart. In order to
prevent this drift, the personal computer side can be
set to either MIDI Clock Sync or, the MIDI sync output
signal temporarily set to “MIDI Clock,” the figure reset
to the accurate tempo and then return again to MTC
sync.

• Initial setting:

bar 001, beat 1: 120 (001 bar 1 beat 120 tempo)

• Setting range of measures:

Determined by the time signature setting.

• Setting range of beats:

Determined by the time signature setting.

• Setting range of tempo:

30-250/quarter note, — (delete)

• Max. setting points:

64 points

* You can set the tempo for each Program individually.
* The settings can be saved and loaded as part of song

data.

* The settings are maintained after you turn off the

power to the recorder.

Checking the stored tempo setting

(1)

Select a Program to check the tempo setting for.

Press the [

SETUP

] key, use the

Jog

dial to select the

“

Tempo Map Set ?

” menu, then press the [

EXECUTE/

YES

] key. Indication on the display changes as

shown below, and the current tempo appears.
The initial setting is “

001 bar 1 =120

”. This means

that a tempo for the first beat of the first measure
is set to 120.

(2)

Rotate the Jog dial clockwise.

You can view the current tempo values in sequence.
Tempo value “

- - - bar - = - - -

” means that no

tempo values are specified after the current setting.
With the initial setting, “

001bar 1 =120

” is followed

by “

- - - bar - = - - -

”.

Storing a tempo value

(3)

Press the [EXECUTE/YES] key.

The indication changes to “

001

(measure)” of

“

001bar

” flashes. (See the figure below.)

This means that you can enter a value now.

(4)

Turn the Shuttle dial to move the flashing cursor
to the desired edit location, and use the Jog dial
to enter the bar/beat/tempo information to be
stored.

The bar and beat settings for the time signatures
determine the setting range of bar and beat settings
for the tempo. You can specify a tempo between
30 and 250 per quarter note.
The indication “

= - - -

” means “no tempo,” which is

used to delete a tempo setting.
When you turn the

Jog

dial, “

= - - -

” appears for

the bars and beats for which no tempo has been
set.

(5)

Press the [EXECUTE/YES] key.

The display shows the stored bar/beat/tempo, then
returns to the Tempo Edit indication (as shown in
step 4).

(6)