Fostex D2424LVmk2, Справочное руководство

Страница: 114 / 158

114
Model D2424LVmkII Reference Manual (Changing the Initial Settings <SETUP mode>)
Flashing
(1) While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
(2) Turn the Jog dial to select “Frame Rate ?” ( “?”
flashes), then press the [EXECUTE/YES] key.
The current frame rate setting appears on the
display. Press the [
EXECUTE/YES
] key to turn off
the flashing “
?
” character; the current setting
flashes.
The initial setting of “
25
” flashes as shown below.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23 22 21 20
19
18 17
16 15 14 13 12
11
10
9 8 7 6 5 4 3 2 1
CLOCK
INT
Setting an MTC frame rate
The “
Setting an MTC frame rate
” menu enables you to
set the frame rate for MTC output from the MIDI
OUT connector of the recorder to an external MIDI
device. If you have already set the type of MIDI
sync output signal to “
MTC
,” you need to set the
frame rate. Use the frame rate of MTC received by
the external MIDI device (or sequence software).
• Initial setting:
[25]
(25 frames)
• Setting range of frame rate:
[24]
,
[25]
,
[29df]
,
[29nd]
,
[30df]
,
[30nd]
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the recorder.
(3) Turn the Jog dial to enter a desired preroll time
value.
You can set a value in one-second increments.
Rotating the
Jog
dial clockwise increases the value,
and rotating it counter-clockwise decreases the
value.
(4) Press the [EXECUTE/YES] key.
The display shows the value, then returns to the
indication that appeared in step 2.
Flashing
Setting MIDI sync output signal
The “
Setting MIDI sync output signal
” menu enables
you to select the type of MIDI sync signals output
from the MIDI OUT connector on the rear panel of
the recorder to an external MIDI device.
The options are MIDI clock & Song Position Pointer,
or MTC (MIDI time code). Select an appropriate
option depending on the type of signal supported
by the connected MIDI device.
If you select MIDI clock & Song Position Pointer, first
you need to set the time signatures and tempo as
described previously. If you select MTC, you first
need to set the MTC frame rate, the MTC offset time,
and the MTC offset mode as described later.
• Initial setting:
[MTC]
• Option:
[CLK]
(clock & Song Position Pointer),
[MTC]
(MIDI
time code),
[Off]
(no output)
* You can set the parameters for each Program
individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the recorder.
(1) While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
(2) Rotate the Jog dial to select “Midi Sync Out ?”
(“?” flashes.), then press the [EXECUTE/YES] key.
The currently-selected MIDI sync signal type
appears on the display.
Press the [
EXECUTE/YES
] key to turn off the flashing
“
?
” indication. The MIDI sync signal type indication
flashes, and the indicator flashes indicating the
SYNC OUT setting.
The initial setting is “
MTC ” as shown below.
(3) Turn the Jog dial to select the desired MIDI sync
signal.
Setting this parameter to “
CLK
” will select MIDI clock
& Song Position Pointer.
Setting the parameter to “
MTC
” (initial setting) will
select MIDI time code.
With the “
Off
” setting, no MIDI sync signal will be
output.
(4) Press the [EXECUTE/YES] key.
The selected MIDI sync signal type is stored, and
the recorder returns to the display with the flashing
“
?
” indicator as shown in step 2.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4
3 2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23 22 21 20
19
18 17
16 15 14 13 12
11
10
9 8 7 6 5 4 3 2 1
CLOCK
INT
To cancel the setting operation, or to exit SETUP
mode after storing data, press the
[STOP]
button
or the
[EXIT/NO]
key. Each time you press one of
these keys, the recorder returns to the previous
hierarchy level of the menu, and finally exits
SETUP mode.
To cancel the setting operation, or to exit SETUP
mode after storing data, press the
[STOP]
button
or the
[EXIT/NO]
key. Each time you press one of
these keys, the recorder returns to the previous
hierarchy level of the menu, and finally exits
SETUP mode.
(3) Turn the Jog dial to enter the desired frame rate.
Rotating the
Jog
dial clockwise or counter-clockwise
displays available frame rates as an alternative.