Forum SSW 40 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 88

Forum SSW 40 Скачать руководство пользователя страница 38

Operation Maintenance Manual

Safety Spinning Wrench

PN 9GV73109 - Revision: 02 2018-05

38

TR

A

N

SP

O

RT/

IN

STA

LL

AT

IO

N

3.4

Setup, Installation and Arrangement

The SSW-40 is completely pre-assembled before shipment,
so that it can be installed immediately after unpacking at
the installation site.
The SSW-40 specific working range must be adjusted
according to pipe string operation at customer site.
The SSW-40 is ready for operation after working range
adjustment and connection to air supply.

Info

Subroutines

The installation change of components is divided
in subroutines. Please refer to described routines
if it named in other processes.

Tools

The following tools are required:

- Crane

- Suitable hoisting equipment

- Lifting eyes

WEAR PROTECTIVE HELMET!

WEAR PROTECTIVE GLOVES!

WEAR SAFETY SHOES!

DANGER

Suspended load!

The falling load can cause severe, even
lethal injuries.

» NEVER stand beneath or in the

swing area of lifted loads

WARNING

Danger of pinching/crushing
hands!

Severe pinching/crushing up to loss of
limbs.

» NEVER reach in the SSW-40.

WARNING

Pinching/crushing hazard from
lowering body!

Severe pinching/crushing up to loss of
limbs.

» NEVER step beneath the SSW-40

with feet.

Info

Installation / Change

Only one process is described in the following
instructions. For the missing process description,
perform the described tasks in reverse order.

«
...
36
37
38
39
40
...
»

Содержание SSW 40

























































































Отзывы:

Нет отзывов