manualshive.com logo in svg

Forum SSW 40, Руководство по эксплуатации, Страница: 16 / 88

Поделиться
Скачать
Forum SSW 40 Скачать руководство пользователя страница 16

Operation Maintenance Manual

 

Safety Spinning Wrench  

 PN 9GV73109 - Revision: 02 2018-05

16

D

ES

C

RIP

TION

1 

DESCRIPTION

The Forum Handling Tools SSW-40 spinner are designed 
with strength and safety factors in accordance with API 
Regulations Section 7K - and is to be used for spinning drill 
pipes. It is possible to operate the SSW-40 by one man. 
The SSW-40 offers the ultimate in simplicity and rugged 
design. The SSW-40 operates pneumatically and spins drill 
pipes and collars from 3.

1/2

’’ to 9.

1/2

’’ OD. The pneumatic 

system is completely integrated and covered into the 
SSW-40. 
The SSW-40 utilizes four steel drive rollers, which provide 
strong precise gripping action on drill pipe and  collars. 
Designed to be compact and self-contained. The SSW-40 
does not require a stand-alone power pack. The gripping 
pressure and spinning are generated at the pipe spinner.

 

Fig. 4: 

SSW-40 main assemblies

1.1 

SSW-40 Main Assemblies

The SSW-40 consists of the assemblies described below. 

INFO

Please note that this illustration does not reflect 
the scope of delivery (see also Chapter „V 
Warranty and Lia„V Warranty and Liability“, 
on page 5). Forum Handling Tools

 

offers

 

bushing assemblies as accessories to match the 
specific pipe diameters. 

Item Name

Item Name

q

Frame (Left/ Right)

t

Roller Assembly and
Gear mechanism

w

Bellow Assembly

y

Backup 
Snub Line Sensor

e

Lifting Valve

u

Air Motor

r

Adjustment Handle

i

Lifting Cylinder

A catalog with complete general drawings and parts lists for the 
assemblies of the SSW-40 can be found in chapter „5 Service“, on page 
50.

i

q

w

e

r

y

t

u

q

Содержание SSW 40

























































































Отзывы:

Нет отзывов