Operation Maintenance Manual
2018-05
PN 9GV73109 - Revision: 02
Safety Spinning Wrench
21
D
ES
C
RI
PT
ION
1.5
Operational Environment
The SSW-40 is designed and constructed for use in the
drilling industry on ships and platforms.
The tool complies with the Machinery Directive
2006/42/EC.
The machine is approved for operation in explosion hazard
areas.
For machines containing any hydraulic powered parts, the
directive 2014/34/EU “Equipment and protective systems
in potentially explosive atmospheres” applies.
The corresponding ATEX certificates are present in the
Data book.
The Classification according to CE (with reference to the
ATEX guideline) is as followed:
II 2G IIB T5
for hydraulic and pneumatic tools
or
II 2G IIB T6
for manual tools
with
CE- marking (with reference to the ATEX guideline)
Marking of the equipment for the Ex- range
II
Equipment group (II)
2
Equipment category
G
For explosive mixtures of air and combustible gases,
mists or vapors (G)
IIB
Category for gases
T
5/
T6
Temperature class
1.6
Equipment Markings
The markings serve for traceability and provide general
information about the component/ device.
The rating plate indicates all relevant information
for distinct identification of the SSW-40:
- Manufacturer
- Machine model
- Production date
- Part number
- Serial number
- Weight
- ATEX classification
Always keep this information at hand for maintenance and
repair work.
The email address of the manufacturer is given on the
support sticker if service is required.
Fig. 17: Technical Support sticker
Fig. 18: Rating plate