Forum SSW 40 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 88

Forum SSW 40 Скачать руководство пользователя страница 2

Operation Maintenance Manual

Safety Spinning Wrench

PN 9GV73109 - Revision: 02

2018-05

2

Revision history

Version Date

Author

Changes

00

2007-01

B+V OT, ROK

Initial Release for B+V Oil Tools LLC

01

2015-08

Forum Handling Tools,
ROK, MH

Layout and Product Update

02

2018-06

Forum Handling Tools,
ROK, MH

Product Line Engineering Product update

Document Approval

Version

Author

Eng. Check

Approval Check

02

Forum Handling Tools
MH 05-2018

Forum Handling Tools
RR 06-2018

Forum Handling Tools
AV

08-2018

The copyright protection claimed includes all forms and
matters of copyrighted material and information now
allowed by statutory or judicial law or hereinafter
granted. All product names and product numbers
mentioned in this publication are trademarks of
FORUM ENERGY TECHNOLOGIES, INC. Other company
brands and product names may be trademarks or
registered trademarks of the respective
companies and are also acknowledged.
All data in this manual takes place using best knowledge. This manual is based on the latest product information that
was available at the time of printing. Depending on ongoing technical improvements (ISO 9001), Forum Handling Tools
reserves the right to alter the design and specifications without notice. The values specified in this manual represent
the nominal value of a unit produced in series. The values in individual units may have slight differences. Only with
written consent from Forum Handling Tools may the contents of this instruction manual be passed on to third persons.
Procedure descriptions and explanations are not to be passed on to third persons. Copying or multiplying for internal use
is permitted. We are grateful for suggestions and comments regarding this documentation or the product itself.

[email protected]

«
1
2
3
4
...
»

Содержание SSW 40

























































































Отзывы:

Нет отзывов