![Formula Air E-PURE ASPRA P10000 Скачать руководство пользователя страница 29](http://html1.mh-extra.com/html/formula-air/e-pure-aspra-p10000/e-pure-aspra-p10000_manual_2320246029.webp)
ENGLISH
User manual | Filter E-PURE ASPRA P10000
www.formula-air.com
28
29
User manual | Filter E-PURE ASPRA P10000
www.formula-air.com
Error-
light *
Display
notification **
Problem
Consequence
Solution /
Explanation
OFF
Filter timer
has been reset.
Next filter
change in:
xxxxhxxm
None
Filter timer has been reset
Filter timer has been reset
OFF
LOW FLOW
fan: xx%
I: xxx uA
brush: xxhxxm
v: xxxxcm/s
vref: xxxxcm/s
Measured
air velocity
is low,
collectors
might be
saturated.
System cleaning capacity might
be lower.
(refer to chapter 5.8 airflow
monitoring)
1. Start self-cleaning routine
2. Turn- off system and if possible
clean the surface of pre-filter
and collectors, then check
whether the LOW FLOW
indication disappears (wait
for 10 min after switching on
P10000-4C)
3. Replace the filters with fresh
filters if the LOW FLOW
indication persists
OFF
TAKE CARE:
Reference flow
will be
measured
ONLY PRESS
AGAIN if filters
have
been replaced
None
ONLY IF NEW COLLECTORS HAVE
BEEN MOUNTED: press button
again.
Otherwise DO NOT UNDERTAKE
ACTION
Pressing the start brush button again
will instruct the system to measure
a new reference velocity. This is
needed in case COMPLETELY NEW
COLLECTORS have been mounted.
In any other situation do not press
the start brush button again as
this will interfere with the airflow
monitoring.
OFF
Filters replaced
Reference flow
will be
measured
None
A new reference velocity will be
measured
System will measure a new reference
velocity.
5. Usage
Содержание E-PURE ASPRA P10000
Страница 1: ...Manual EN Handleiding NL Bedienungsanleitung DE FILTER E PURE ASPRA P10000...
Страница 93: ...93...