Formula Air E-PURE ASPRA P10000, Руководство пользователя

Страница: 15 / 94

ENGLISH
User manual | Filter E-PURE ASPRA P10000
www.formula-air.com
14
15
User manual | Filter E-PURE ASPRA P10000
www.formula-air.com
Metal
housing [J]
Fan [A]
The fan draws in air from the top to the inside.
Collector housing [B]
The filter protection houses the collectors in the P10000.
Electrostatic section [C]
The electrostatic section charges particles and viruses in the air so that they are collected in
the coarse filter and the collectors.
Coarse filter [D]
The coarse filter removes coarse particles from the air. This prolongs the life of the collectors
[E]. The coarse filter is also cleaned automatically a programmed interval.
Collectors [E]
The collectors remove particulate matter, ultra-fine particulate matter, viruses, bacteria, prions,
yeast traces, animal dust and soot from the indoor air. Formula Air recommends that your
collectors be replaced periodically with continuous use. See chapter 5 for more information.
Filter protection [F]
The grid protects the collectors and directs the air flow.
Dust collection [G]
Here, the coarse dust is collected after a self-cleaning cycle. See chapter 5.4 for dust removal.
Space for forklift
The E-PURE ASPRA P10000-4C can be carefully moved using a forklift. For this a pallet truck
must be used with a spoon length of at least 120 cm.
Power conn ethernet cable [I]
Cable with protective grounded plug (type: CEE7 / 4 Schuko). Never replace the cable
yourself. Always have this done by an authorized installer. The location can be different per
installation. The ethernet cable for the central control is also located here.
Metal housing [J]
The metal housing is made of coated galvanised steel.
Pressure regulator and filter [K]
Connection for a Ø6 mm and 6-10 bar air hose. Then connect your air compressor. The
compressor must be able to supply 1 L / min at 6-10 bar. Compressor and air hose are not
included with the E-PURE ASPRA P10000-4C.
If the air hose is connected to the pressure regulator (type: P31EB12EGMBNTP), e.g.
condensate will be filtered from the compressed air and the air pressure can be set for the
brush cleaning mechanism. This is set to 6 bar by default. Periodically the reservoir will have to
be emptied with collected water.
Control box [L]
The control box houses the logic controller, the main switch and the position push buttons. The
control box may only be opened by a certified/approved installer.
3. Functional overview