68
After lubrication: Using a cloth, completely remove any excess lubricant
(grease, oil), especially from the table surface on which the cutting material and work
pieces in contact with the cut material, ie the knife body and the pressure bar, are
placed.
9.5 Service
9.5.1 General recommendations
• After each change, clean the machine (mainly from paper dust)
• Pay attention to the cleanliness of contacts of control elements (contactors,
connectors)
• Check the correctness of screw connections of the cutter elements and tighten the
screws if necessary.
9.5.2 Checking hydraulic hoses
Check regularly that the hose is not damaged or frayed, and check the oil level.
Recommended test criteria for hydraulic hoses:
• Damage to the inner layer (scratches, cuts, cracks)
• Snake deformation
• Leaks (on the surface of the hose, fixing)
The condition of the hoses should be checked at least every 12 months.
Replacement of hoses is recommended at least every 6 years.
9.5.3 Knife regeneration
The quality and accuracy of cutting depends mainly on the sharpness of the knife and
the right angle of its blade.
Features of a blunt knife
• rough and uneven surface of the sliced stack
• ticking the edge of the cut material
• inaccurate slicing
• increased formation of paper dust.
10. Failures
Danger!
Содержание Cut-True 31H
