![background image](http://html1.mh-extra.com/html/formax/cut-true-31h/cut-true-31h_operators-manual_2320005042.webp)
61
in contact with the guides should be carried out in the upper (Fig. 46a) and lower
position of the knife body (Fig. 46b). Lubricate recommended places on both sides of
the cutter.
In places requiring lubrication with a grease, apply grease with a grease gun. It is
enough to press the trigger of the lubricator 2-3 times.
The indicated places should be lubricated once a week!
Table 10. List of lubrication points of the cutter mechanisms
Sign
Cutter
mecha
nism
Lubricant
type
Lubrication spot
Figu
re
Knife
mecha
nism
Grease
• Side surfaces of the guides (in
contact with the knife body)
• Internal surfaces of guides (in
contact with rollers)
• Side surfaces of the knife body
46a,
46b
Backgu
age
mecha
nism
Oil
• guide roller (apply a thin layer of oil.)
• lead screw (apply a thin layer of
grease)
47
48
Clamp
mecha
nism
Grease
• shoe beam slides
• shaft bearings
• surface of the lead screw
• sliding bushes of the pressure
mechanism
47
49
49
49
1
2
3
Содержание Cut-True 31H
