60
9. MAINTENANCE
Danger
Maintenance and lubrication work should be carried out after turning off
the machine (main switch in position "0")
9.1 Daily maintenance
Every day, remove all waste from the cutter and the operator's working space.
9.2 Treatments that should be performed cyclically
At regular intervals, waste and dirt should be removed from hard to reach machine and
surrounding areas:
• Regularly remove paper waste from the press and knife drive holes
• Air intakes for motors must be kept free of dust and debris.
Danger
Caution- fire hazard with insufficient ventilation.
the machine guards must be put back into place immediately after
maintenance work has been completed!
9.3 Lubrication
The list of lubrication points is shown in Figures, 46, 47, 48,49.50 and described in
table 10.
Access to lubrication points is possible after removing the covers shown in Figs.
44,45,48.50
When lubricating the knife assembly, use the controls as when changing the knife
(chapter 8.1)
Lubrication of the side surfaces of the guides as well as the surface of the knife body
Содержание Cut-True 31H
