Ford 2010 Milan Hybrid страница 44 Скачать руководство пользователя

Страница: 44 / 326

Radio Display

Condition

Action Required

NO TEXT

Category information

not available.

Category information

not available at this

time on this channel.

The system is working

properly.

NO SIGNAL

Loss of signal from

the SIRIUS satellite or

SIRIUS tower to the

vehicle antenna.

You are in a location

that is blocking the

SIRIUS signal (i.e.,

tunnel, under an

overpass, dense foliage,

etc). The system is

working properly. When

you move into an open

area, the signal should

return.

UPDATING

Update of channel

programming in

progress.

No action required. The

process may take up to

three minutes.

CALL SIRIUS
1–888–539–7474

Satellite service has

been deactivated by

SIRIUS Satellite

Radio.

Call SIRIUS at

1–888–539–7474 to

re-activate or resolve

subscription issues.

NAVIGATION SYSTEM (IF EQUIPPED)

Your vehicle may be equipped with a navigation system. Refer to the

Navigation system

supplement for further information.

SYNC (IF EQUIPPED)

Your vehicle may be equipped with SYNC, a hands-free communications
and entertainment system with special phone and media features. For
more information, please refer to the

SYNC

supplement or to the

SYNC

section in the

Navigation system

supplement (if equipped).

2010 Milan

(mln)

Owners Guide, 1st Printing
USA

(fus)

Entertainment Systems

Содержание 2010 Milan Hybrid







































































































































































































































































































































Результаты поиска

Содержание 2010 Milan Hybrid

Отзывы:

Похожие инструкции для 2010 Milan Hybrid

Бренды по названию

Популярные бренды

Ford 2010 Milan Hybrid, Руководство пользователя

Результаты поиска

Содержание 2010 Milan Hybrid

Отзывы:

Похожие инструкции для 2010 Milan Hybrid

Бренды по названию

Популярные бренды