Ford 2010 Milan Hybrid страница 23 Скачать руководство пользователя

Страница: 23 / 326

Autolock

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

1. To disable/enable the autolock
feature, select this function from the
SETUP control for the current
display mode.

2. Press the RESET button to turn
autolock on or off.

Autounlock

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

1. To disable/enable autounlock
feature, select this function from the
SETUP control for the current
display mode.

2. Press RESET to turn autounlock
on or off.

Blind spot system (if equipped)

The blind spot information system is designed to assist the driver by
monitoring the side areas on both sides of the vehicle.

1. Select this function from the
SETUP menu to disable the system.

2. Press RESET to turn blind spot
off or on.

Cross traffic alert system (if equipped)

The cross traffic alert system is designed to assist the driver by
monitoring the areas toward the rear of the vehicle.

1. Select this function from the
SETUP menu to disable/enable the
system.

2. Press RESET to cross traffic off
or on.

Reverse park aid (Reverse sensing system) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

2010 Milan

(mln)

Owners Guide, 1st Printing
USA

(fus)

Instrument Cluster

Содержание 2010 Milan Hybrid







































































































































































































































































































































Результаты поиска

Содержание 2010 Milan Hybrid

Отзывы:

Похожие инструкции для 2010 Milan Hybrid

Бренды по названию

Популярные бренды

Ford 2010 Milan Hybrid, Руководство пользователя

Результаты поиска

Содержание 2010 Milan Hybrid

Отзывы:

Похожие инструкции для 2010 Milan Hybrid

Бренды по названию

Популярные бренды